belt diagram
#1
belt diagram
Hit 8 below zero (F) last night, one of my belts snapped as I was almost home, my FSM download is a mess after some computer trouble can any one post a link or diagram on what goes where (3.slow)- Thanks! burrrrrrrrrr
Last edited by tktmsa; 12-10-2009 at 08:11 AM.
#2
Registered User
The power steering belt is the first one you can get at when everything is on. It goes from the pump to the fan bracket pulley then to the crank.
Next is the AC belt, if yo uhave it. It just goes to the crank from the AC.
Then the belt furthest back is the alt, i think it goes to the crank and back.
P/S - fan pulley - crank
AC - small AC adjuster pulley - crank
Alt - crank
Next is the AC belt, if yo uhave it. It just goes to the crank from the AC.
Then the belt furthest back is the alt, i think it goes to the crank and back.
P/S - fan pulley - crank
AC - small AC adjuster pulley - crank
Alt - crank
#3
Thanks Tub,
Can you point me to the tensioners for each belt ?
Do I have to remove the fan to get the belts on?
Any visuals around? The FSM and my Haynes manual are wonderfully vague.
Can you point me to the tensioners for each belt ?
Do I have to remove the fan to get the belts on?
Any visuals around? The FSM and my Haynes manual are wonderfully vague.
#4
the PS pump is the tensioner for its belt.
The Alt is the tensioner for its belt.
The AC has a tensioner pulley. Its the lowest pulley on the front of the engine and has an adjustment bolt on it. You have to loosen the bolt that goes through the pulley then you can adjust it.
The Alt is the tensioner for its belt.
The AC has a tensioner pulley. Its the lowest pulley on the front of the engine and has an adjustment bolt on it. You have to loosen the bolt that goes through the pulley then you can adjust it.
Thread
Thread Starter
Forum
Replies
Last Post
zytra
86-95 Trucks & 4Runners
32
01-24-2019 03:16 PM
primordialbeast117
86-95 Trucks & 4Runners
11
12-19-2015 12:23 PM