YotaTech Forums

Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Beefier Tcase mount?

   
Old Aug 2, 2007 | 09:01 AM
  #1  
AndyL's Avatar
AndyL
Thread Starter
Registered User
 
Joined: May 2007
Posts: 125
Likes: 0
From: Calgary, Eh!
Beefier Tcase mount?
Well, when I flopped this past weekend - seems I did in the tranny/tcase mount... It was a V6 mount (22r/auto); Are there other options out there for beefier mounts?

Thanks in advance,

Andy
Reply
0
Old Aug 2, 2007 | 09:16 AM
  #2  
AxleIke's Avatar
AxleIke
Contributing Member
 
Joined: Apr 2004
Posts: 5,464
Likes: 6
From: Arvada, Colorado
Are you talking about the crossmember?

If so, there are many, many options.

Here are two:

Budbuilt
Frontrange Offroad
Reply
0
Old Aug 2, 2007 | 09:24 AM
  #3  
AndyL's Avatar
AndyL
Thread Starter
Registered User
 
Joined: May 2007
Posts: 125
Likes: 0
From: Calgary, Eh!
No, was refering to the rubber mount that sits between the crossmember and the tcase.
Reply
0
Old Aug 3, 2007 | 09:15 AM
  #4  
AndyL's Avatar
AndyL
Thread Starter
Registered User
 
Joined: May 2007
Posts: 125
Likes: 0
From: Calgary, Eh!
Here's the piece if there was any question:

http://www.wabfab.org/products/tcase...-mount-600.jpg

Replaced it with a new v6 mount when I first got the truck a 4 months back, apparently this weekends flop tore it again.
Reply
0
Old Aug 3, 2007 | 09:42 AM
  #5  
ewong's Avatar
ewong
Registered User
 
Joined: Aug 2005
Posts: 1,731
Likes: 3
From: Philly PA
Total Chaos:
http://www.chaosfab.com/product/acce...y4wd/95400.jpg

Front Range Off Road http://frontrangeoffroadfab.com/nfos...4f39a6ea655752
Reply
0
Old Aug 3, 2007 | 09:44 AM
  #6  
deathrunner's Avatar
deathrunner
Registered User
 
Joined: Apr 2004
Posts: 2,969
Likes: 1
From: San Diego CA
Originally Posted by AndyL
Here's the piece if there was any question:

http://www.wabfab.org/products/tcase...-mount-600.jpg

Replaced it with a new v6 mount when I first got the truck a 4 months back, apparently this weekends flop tore it again.
I want to say that Daystar or ENERGY Suspension makes a poly one. Not positive though.

I have seen some prerunners do solid motor and tranny mounts (No rubber). Stronger, but you feel every vibration.
Reply
0
Old Aug 4, 2007 | 03:26 AM
  #7  
mt_goat's Avatar
mt_goat
Contributing Member
 
Joined: Nov 2002
Posts: 10,666
Likes: 5
From: Oklahoma State
I tore my original rear mount too (on one side). I have now gone to dual cases so I put 2 mounts on. 2 mounts should be stronger than one

Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Newb looking to do an ENTIRE drivetrain conversion on 2gen 4Runner
TheBFA
Solid Axle Swaps, All Years
8
Feb 15, 2020 06:55 AM
Distance vertically between oil pan and highest part of axle housing?
live4soccer7
84-85 Trucks & 4Runners
3
May 11, 2016 06:52 PM
1990 pickup 3.4 swap radiator overflow mount issue
scott90
86-95 Trucks & 4Runners
7
Oct 4, 2015 09:21 AM
1991 toyota pickup build
Brodetski
86-95 Trucks & 4Runners (Build-Up Section)
0
Sep 30, 2015 11:50 PM
please help me! Problem opening trans case G52
hiluxinargentina
86-95 Trucks & 4Runners
3
Sep 30, 2015 05:51 PM
Tags
Back to Subforum
86-95 Trucks & 4Runners
View Next Unread
Wow, 2951 pounds


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -8. The time now is 12:03 PM.