To ALL who have a body lift and aftermarket bumpers/sliders
10-30-2007, 08:02 AM
#1
Registered User
Thread Starter
Join Date: Oct 2004
Posts: 1,230
Likes: 0
Received 0 Likes
on
0 Posts
To ALL who have a body lift and aftermarket bumpers/sliders
Can you guys post pictures of either your runners or pickups with a 2 or 3 inch body lift and after market bumpers? ARB, marlin, allpro...doesnt matter. Just specify what bodylift you havd and what bumpers your running. Im looking for bumpers, but I dont want the huge gap betwee nbumper/body. I wanna see what the other BL rigs are running, and IF you have adjusted your mounting to make up for the body lifts. Thanks in advance...
Last edited by rworegon; 08-14-2014 at 06:46 PM.
10-30-2007, 08:14 AM
#2
Registered User
Join Date: Feb 2007
Location: Omaha Ne
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
I THINK IT HAS A 3 INCH BODY LIFT ON IT.
I HATE IT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!! IAM GONNA TAKE THIS STUPID BODY LIFT OFF AND PUT IN A SUSPENSION LIFT. IT CAME WITH THE TRUCK. I COVERED UP THE GAP WITH LAWN EDGING.
10-30-2007, 08:34 AM
#3
Registered User
Join Date: Apr 2005
Location: Godfrey, Illinois
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
Before I bought my ARB, I asked around and even talked to a few companies if an ARB bumper could be modified to fit with a 3" BL. Most all said it couldn't be done. I talked with my fab guy who was going to do the work for me (he had never done this) and said he could do it. He basically cut the mounting brackets off and welded them back 3" lower, it turned out great! I've seen a few other trucks since then with the same mod.
10-30-2007, 12:48 PM
#5
Registered User
2" body lift (don't remember the brand)
Custom bumpers and sliders
And it can take a HIT as this fool who ran a red light found out the hard way. He went to the hospital, his truck went to the bone yard, we went to dinner.
Custom bumpers and sliders
And it can take a HIT as this fool who ran a red light found out the hard way. He went to the hospital, his truck went to the bone yard, we went to dinner.
Last edited by MonsterMaxx; 10-30-2007 at 12:50 PM.
10-30-2007, 12:59 PM
#6
Contributing Member
Join Date: Jun 2007
Location: Denver, CO
Posts: 1,299
Likes: 0
Received 0 Likes
on
0 Posts
2" body lift (don't remember the brand)
Custom bumpers and sliders
And it can take a HIT as this fool who ran a red light found out the hard way. He went to the hospital, his truck went to the bone yard, we went to dinner.
Custom bumpers and sliders
And it can take a HIT as this fool who ran a red light found out the hard way. He went to the hospital, his truck went to the bone yard, we went to dinner.
Trending Topics
10-30-2007, 01:13 PM
#8
Here's mine, 3" lift, bumpers and sliders raised to match:
How bumpers were done:
- http://www.4crawler.com/4x4/4R_bumpers.shtml
- http://www.4crawler.com/4x4/CheapTri...ringHangerDrop
- http://www.4crawler.com/4x4/ForSale/RearBumper.shtml
Note, front bumper height is not flush to the grill due to winch.
How sliders were done:
- http://www.4crawler.com/4x4/ForSale/...ar_HowTo.shtml
How bumpers were done:
- http://www.4crawler.com/4x4/4R_bumpers.shtml
- http://www.4crawler.com/4x4/CheapTri...ringHangerDrop
- http://www.4crawler.com/4x4/ForSale/RearBumper.shtml
Note, front bumper height is not flush to the grill due to winch.
How sliders were done:
- http://www.4crawler.com/4x4/ForSale/...ar_HowTo.shtml
Last edited by 4Crawler; 10-30-2007 at 01:15 PM.
10-30-2007, 01:28 PM
#9
Registered User
They are three different types (fog, drivers and 120w pencil), tied thru relays into the headlights.
Flick the switch to running lights and the fogs come on.
Flick to the next position (w/ brights off) and the fogs turn off and the driving lights come on.
Flick to the brights and the drivers turn off and the pencils come on.
Of course, I can override too if I want and either disable them or turn them on manually.
Flick the switch to running lights and the fogs come on.
Flick to the next position (w/ brights off) and the fogs turn off and the driving lights come on.
Flick to the brights and the drivers turn off and the pencils come on.
Of course, I can override too if I want and either disable them or turn them on manually.
Last edited by MonsterMaxx; 10-30-2007 at 01:30 PM.
10-30-2007, 02:57 PM
#11
Registered User
Thread Starter
Join Date: Oct 2004
Posts: 1,230
Likes: 0
Received 0 Likes
on
0 Posts
Not sure on my front bumper yet..But im close to sure I want the allpro rear bumper. Guess i'll just have to customze the brackets somehow to raise the bumpers up. Can I make extensions for the brackets, or do I have to cut the brackets off and reweld them lower?
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
04-11-2024 04:39 PM
GreatLakesGuy
The Classifieds GraveYard
8
09-04-2015 09:27 AM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM
