What do I need?

TIA

 

and a stealership.

 

nothing too special except a 54mm (2 1\8") socket for the wheel bearing nuts. get a full rebuild kit and wheel bearings from trail gear. the cone washers on the hubs can be a pain to get off, but a few whacks with a hammer and they pop right off. thats all i can think of right now.

 

...and pick up a fish scale.

4crawler.com has a nice write-up on it as well as some other kool stuff....

 

54 mm socket or 2 1/8
Fish pull scale
good snap ring pliers
brass drifts for cone washers
torque wrench

Email me if you have questions.