Ride Quality?
#61
I saw your thread good luck with your build, Hope all goes as planned. I sure love my 4Runner
#62
The reason I ask for the picture is becuse I have 1/2 rotation more to one side of the truck and I am trying to figure out how to make it evan. Thanks that picture helps.
#64
I am getting ready to up grade the brakes I saw a thread on the board but can not find it. I ordered and received the V6 calipers and FJ 60 rotors from Marlin Crawler. I also got the new longer brake lines in red. I still need the wheel spacers and paint to paint the calipers.
#66
With the rims I have, I only need about a inch to clear the caliper. There is a place in SJ that I can get them for $40.00. I was wrong it is Fontana.
Last edited by RandyatBBY; Mar 8, 2010 at 10:22 PM.
#68
Well it is time for another up grade. Since I lifted the 4Runner 3 inches, when you make a left hand turn I have to back up to make it. I lost 1/2 of a turn to the right side and it went to the left side. So turning to the left is great but to the right sucks. This is because of the steering box and the connectors to the nuckles. I am going to install IFS steering box and over the spring drag link and tie rods. Pictures to come later. I have the box and need the other parts.
#69
Some pictures for Eric. I now have three 4X4 and one has to go so this ride will be up on the block But I will keeping working on it until it sells.






Uploaded with ImageShack.us






Uploaded with ImageShack.us
#70
#72
That is right. It is not gone yet I will not give it away. I will take the time to do it right.
Last edited by RandyatBBY; Sep 18, 2011 at 08:50 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Brodetski
86-95 Trucks & 4Runners (Build-Up Section)
0
Sep 30, 2015 11:50 PM
JookUpVandetti
86-95 Trucks & 4Runners
10
Sep 30, 2015 08:58 AM








