84-85 Trucks & 4Runners 2nd gen pickups and 1st gen 4Runners with solid front axles

quick question about mounting my ifs box

Old Aug 19, 2010 | 07:58 AM
  #1  
laskt9's Avatar
Thread Starter
Registered User
 
Joined: Jan 2010
Posts: 208
Likes: 0
From: West Lafayette, IN
quick question about mounting my ifs box

im doing histeer quickly before a trip to attica next weekend now im planning on doing RUF at the end of september so was wondering if i could mount the box as far forward as possible and still run my rough country springs until i get the chance to swap them out.
Reply
Old Aug 19, 2010 | 08:04 AM
  #2  
4Crawler's Avatar
Contributing Member
20 Year Member
iTrader: (3)
 
Joined: Jun 2002
Posts: 10,822
Likes: 34
From: SF Bay Area, CA
Sure, no problem. My box was mounted up to the front body mount bracket when I had an aftermarket 3.5" lift spring. Later did the rear spring swap and all was still fine:
- http://www.4crawler.com/4x4/4R_suspe...II.shtml#Front

Last edited by 4Crawler; Aug 19, 2010 at 08:12 AM.
Reply
Old Aug 19, 2010 | 09:00 AM
  #3  
laskt9's Avatar
Thread Starter
Registered User
 
Joined: Jan 2010
Posts: 208
Likes: 0
From: West Lafayette, IN
awesome thanks alot!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
88sasturbotoy
Axles - Suspensions - Tires - Wheels
3
Jan 30, 2026 01:57 PM
jasonty
Pre 84 Trucks (Build-Up Section)
41
Dec 23, 2018 01:00 PM
rushw
General Electrical & Lighting Related Topics
4
Jul 18, 2015 01:46 PM
icentropy
86-95 Trucks & 4Runners
7
Jul 14, 2015 10:23 AM
skoti89
Offroad Tech
3
Jul 8, 2015 12:05 AM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 03:23 PM.