85toy4runner

damn that thing is a monster , do you have videos of it

rokblok

iTrader: (1)

You removed the 3.slo, and installed a turbo 20RE? I didnt know they existed... Or it's a 22RE with a 20R valve cover? Why not a 3.4 swap and twin turbo that? I mean, if you're gonna do it, do it all the way....

Looks cool bro. I would love to see vids of this. With clear audio please....

What exhaust manifold/header are you using?

toyotahonda

This is just the proto type lol I just took a old header cut it off welded it back on upside down but it dose have a good turbonetics ball bearing turbo it rips third gear off on 36's lol

toyotahonda

Its on hondas300 it has anti leg boost by gear wide open shift everything you could ever want

rokblok

iTrader: (1)

Where are you? Because I've yet to ever see an original NA 22RE turbo set up run. I want to witness this madness, and possible carnage.....

toyotahonda

Was state rich tuned motorsports I have a 1200 whp integra its a lot of fun lol

rokblok

iTrader: (1)

Of course... Just about as far from me as you could get.... I'm in Ga....

mike_smith

its sad that my 86 4runner turbo going to out hp my stang gt and my wifes turbo volvo s60 by about 70 hp well for now

toyotahonda

Here's how bad the stock 22re ecu is that motor is stock with a delta 357 grind can it made 62whp and like 70 t just by making the Honda ecu work and tuning it it made 100whp 125 t

vital22re

iTrader: (2)

these older toyota ecu's aren't anything to write home about. They work to get you to work and back everyday, but not to get you down the track in 8 seconds. Not a bad idea running a different ecu that can be tuned.

toyotahonda

here is the real motor lc 2.6 stroker motor with forged cp pistons and stage 5 head on the way with a gt35r turbo and huge intake manifold on e85 should make 500

ThatGuy1295

GEES!! you werent kidding. Niice!!

toyotahonda

the dyno is the best toy ever you can show the punks how much power they dont have and charge them for it lol

nothingbetter

mis post

rokblok

iTrader: (1)

Ok, so how is the 3RZ to turbo? Fuel requirements? ECU requirements?

I have researched this quite a bit, but I want to hear from someone with experience with the 3RZ, and that's not trying to sell me a turbo kit....

toyotahonda

Will a v6 tranny bolt to the he 22r I haven't messed with it yet I just built this thing Cruz my buddy bought a Toyota with a 5.0 ho motor and he thinks its fast I smoked it lol

toyotahonda

20 pounds on crappy pistons lol

rokblok

iTrader: (1)

No the V6 trans(R150F) will not just bolt up to a 22R(E). If you find a factory turbo truck, with the R151F, you can use the turbo bell housing on the V6 trans. And the R151F is stout as well. But the V6 trans are more plentiful.

I would venture to say you will want to research and maybe talk to the Marlin guys, with that power you may end up using a Supra trans(R154?).

sjyota

Truck is out of the shop the new clutch is done I had a buddy do it while I was hot of town and the kit can with a new throw out. Bearing and when he put it all in I didn't work ad he had to but the old throw out back in because they where different kids weird but he says that it is bad ass don't slip at all

junkyardog05

Could you put up a build sheet on your 300 hp 22r? thanks