for sale 96 3.4 engine 100k mi. in nc
05-13-2012, 12:18 PM
#1
Registered User
Thread Starter
for sale 96 3.4 engine 100k mi. in nc
1996 3.4 engine only. 900.obo
monroe nc
monroe nc
Last edited by dropzone; 05-19-2012 at 04:54 AM. Reason: added required location
05-19-2012, 08:11 AM
#3
Registered User
Thread Starter
the engine is from a 96 T100 with 100k mi.. it looks like it was in a head on, drivers side motor mount is bent, and the bracket mount on the intake is partially broken off, but repairable, if needed, i did not need this bracket on my swap. the intake is usable. the harness is cut(salvage yard) the timing belt cover, and the fan mount bracket is gone. i was going to use this engine for my swap, did'nt find a harness so i ended up going with a 2000 4runner engine, trans, harness and ecu from the same car. i swapped the oil pan,sump and dipstick from my 4runner engine, i have a oil pan from a 3.0 ( same as T100)for a swap. this engine is very clean inside and out, no oil leaks etc. i would change the timing belt water pump before install.
05-24-2012, 10:19 AM
#6
Registered User
Thread Starter
you can check out these guys. you know where to ship it to,residence, business or terminal. i can crate, and deliver in their truck from a business with a forklift in Monroe N.C. http://www.uship.com/
Last edited by donomite49; 06-16-2012 at 04:34 PM.
Trending Topics
09-21-2012, 06:39 AM
#8
Registered User
Join Date: Sep 2002
Location: Land of the Longhorns
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
is the bracket on the intake manifold the throttle cable bracket? i need a throttle cable bracket if you can part one out, even if it's partially broken.
07-12-2013, 04:54 PM
#19
Registered User
Thread Starter
yes i do.
let me find the shipper i found that has reasonable rates.
i will need more info to get a quote so i will pm you when i find it.
it will be more expensive to have it shipped to a house rather than a business with a forklift, or you pick it up at a trucking terminal.
let me find the shipper i found that has reasonable rates.
i will need more info to get a quote so i will pm you when i find it.
it will be more expensive to have it shipped to a house rather than a business with a forklift, or you pick it up at a trucking terminal.
