Toyotally's 1990 4runner build
05-04-2013, 05:46 AM
#22
Registered User
Thread Starter
Join Date: Oct 2012
Location: Factoria Washington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
05-04-2013, 06:11 AM
#23
Registered User
Your build is coming along quite well! Nice work! The tercel and supra are sick!! I had a 87 supra pretty cool ride but not as nice as your 92. As for the crossover on your exhaust i beleive there is a mod you can do that ive seen on other 3.0 builds. What kind of lift is on your runner?
05-04-2013, 09:21 AM
#24
Registered User
Thread Starter
Join Date: Oct 2012
Location: Factoria Washington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Your build is coming along quite well! Nice work!I'm tercel and supra are sick!! I had a 87 supra pretty cool ride but not as nice as your 92. As for the crossover on your exhaust i beleive there is a mod you can do that ive seen on other 3.0 builds. What kind of lift is on your runner?
05-07-2013, 01:27 PM
#29
Registered User
You figure out your crossover pipe?? By the way your engine build is nice compared to some 3.0 builds ive seen. I personally havent torn one apart but im sure its more challenging than a 22r 22re.Props.
05-07-2013, 03:15 PM
#30
Registered User
Thread Starter
Join Date: Oct 2012
Location: Factoria Washington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
I've got the plans and idea layed out. Gonna dink around with an extra set of manifolds. Can't do too much outside the car cuz I need to see my clearance. My body lift should help.
Yea I went all the way on this one. I have never messed with a 3vze before only straight 6s so it's a little different but I'm sure as he'll pretty familiar now. I'm a heavy duty line tech so I'm doing lots of motors. I wanted to do a clean motor and make everything nice for looks, peace of mind, more knowledge, and I just can't help myself.
Yea I went all the way on this one. I have never messed with a 3vze before only straight 6s so it's a little different but I'm sure as he'll pretty familiar now. I'm a heavy duty line tech so I'm doing lots of motors. I wanted to do a clean motor and make everything nice for looks, peace of mind, more knowledge, and I just can't help myself.
05-07-2013, 10:25 PM
#33
Registered User
Thread Starter
Join Date: Oct 2012
Location: Factoria Washington
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
It's on my mind so here it goes.
The oil pan is not that large and shaped weird. Probably to fix with the subframe
Does anyone know the clearance, because I was pondering making a larger capacity pan.
Anyone have any input on this
The oil pan is not that large and shaped weird. Probably to fix with the subframe
Does anyone know the clearance, because I was pondering making a larger capacity pan.
Anyone have any input on this
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
MMA_Alex
86-95 Trucks & 4Runners (Build-Up Section)
25
04-18-2017 05:07 AM
madxman21
86-95 Trucks & 4Runners
2
07-09-2015 10:26 AM
