2nd Gen 4Runner Ditch light brackets
#1
Registered User
Thread Starter
Join Date: Feb 2014
Location: Atlanta
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
2nd Gen 4Runner Ditch light brackets
Haven't been able to find anyone making these so I went ahead and fabbed some up myself from 3/16"x1" cold rolled bar. I couldn't make the correct bends on my vise so I welded them together.
The ~45deg bend was needed to cleared the back corners of the hood while opening and I wish I had pulled the hood when installing cause I scratched the crap out of them.
They're damn rock solid but kind of a pain to install, required some cutting on the wiper valance and longer bolts.
Otherwise I'm 100% satisfied. (Please excuse my $30 pods...)
#3
Registered User
Thread Starter
Join Date: Feb 2014
Location: Atlanta
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Really not much, these are spots so the beam isn't super wide. I also doesn't hurt that my paint is pretty well faded so theres not much if any gloss.
I can post night pics when the sun goes down.
I can post night pics when the sun goes down.
Thread
Thread Starter
Forum
Replies
Last Post
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM