Help! need 54mm socket
#1
Contributing Member
Thread Starter
Join Date: Nov 2004
Location: phoenix
Posts: 1,137
Likes: 0
Received 0 Likes
on
0 Posts
Help! need 54mm socket
I am starting a teardown on the front end of my truck tomorrow.
Going to install new rotors and pads
lube or replace front wheel bearings/seals
replace the passenger CV joint.
I have a good set of tools, hands to help etc....
but I really need to borrow a 54mm socket, and a pull scale if possible.
If anyone can loan the above out for this weekend, possibly through next weekend I would be very appreciative. Short notice I know, but I thought I would ask before I bite the bullet and shell out more cash at sears.
upon further thought I would need it through next weekend....I'll get everything set up this weekend and do the job next. I still need to pull the CV's from my wrecked p/u to take in for exchange.
I'll travel to borrow if needed.
Thanks in advance.
Oh BTW if anyone needs collateral, I'll put Grady's Land Rover up
Going to install new rotors and pads
lube or replace front wheel bearings/seals
replace the passenger CV joint.
I have a good set of tools, hands to help etc....
but I really need to borrow a 54mm socket, and a pull scale if possible.
If anyone can loan the above out for this weekend, possibly through next weekend I would be very appreciative. Short notice I know, but I thought I would ask before I bite the bullet and shell out more cash at sears.
upon further thought I would need it through next weekend....I'll get everything set up this weekend and do the job next. I still need to pull the CV's from my wrecked p/u to take in for exchange.
I'll travel to borrow if needed.
Thanks in advance.
Oh BTW if anyone needs collateral, I'll put Grady's Land Rover up
#3
Contributing Member
Thread Starter
Join Date: Nov 2004
Location: phoenix
Posts: 1,137
Likes: 0
Received 0 Likes
on
0 Posts
Mike thanks for the offer.
I went ahead and ordered one from marlin, I should have one in my tool box anyway.
This weekend was a total bust, looked all around for the socket on Sat, then the washing machine decided to leak all over the floor on Sunday.
Good times
I went ahead and ordered one from marlin, I should have one in my tool box anyway.
This weekend was a total bust, looked all around for the socket on Sat, then the washing machine decided to leak all over the floor on Sunday.
Good times
Thread
Thread Starter
Forum
Replies
Last Post