Trail gear front hanger help! 1st gen
#1
Trail gear front hanger help! 1st gen
Going to install trailgear front hanger and springs today. But I am alittle confused about the front hangers mounting position.
Originally I thought that all I needed to do was install the new hanger in the stock location flush with the frame. But after reading the website again it seems as if you are suppose to mount the haanger 1" forward of the frame. So it still mounts on the underside of the frame but you just move it so it juts out 1" past the end of the frame and then just weld the gussets in right? Or no?
This in on an 1982 SR5 pickup.
Thanks!!
Originally I thought that all I needed to do was install the new hanger in the stock location flush with the frame. But after reading the website again it seems as if you are suppose to mount the haanger 1" forward of the frame. So it still mounts on the underside of the frame but you just move it so it juts out 1" past the end of the frame and then just weld the gussets in right? Or no?
This in on an 1982 SR5 pickup.
Thanks!!
Last edited by ChriSD; 01-04-2009 at 08:42 AM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
07-06-2015 04:07 AM