solid front axle any good?
02-04-2010, 05:30 PM
#1
Registered User
Thread Starter
solid front axle any good?
I am planning on doing a sas on my runner and the only axle around where i live looks like this look carefully and tell me do you think any of it is still good? at first glance all i saw was rust but i dont know. damn rust!
Last edited by Joshua4507; 02-04-2010 at 05:32 PM.
02-04-2010, 05:34 PM
#5
Registered User
Well, i'd want to see it in person.
If the knuckles were pitted REALLY bad, then you might want to steer clear, but if there isnt that much pitting then you can fill them with JB weld and smooth to your hearts desire.
Otherwise, it doesnt look that bad.
If the knuckles were pitted REALLY bad, then you might want to steer clear, but if there isnt that much pitting then you can fill them with JB weld and smooth to your hearts desire.
Otherwise, it doesnt look that bad.
02-04-2010, 05:52 PM
#6
can you take any other pictures of the axle housing itself, more from the front view as you would see it on the truck?
there are three different mini truck axles:
Toyota Mini Truck Front Axle Identification
79-80 no gusset
81-83 short gusset (to u-bolts)
84-85 long gusset (past u-bolts)
ID Toyota Mini Truck axles
79-80 no gusset
81-83 short gusset (to u-bolts)
84-85 long gusset (past u-bolts)
obviously if you pick that thing up you are gonna need new calipers, and disk
might has well do FJ rotors and v-6 calipers and rebuild it
edit: i never understand why people don't cover stuff like axles up...the knuckle balls may clean up ok using a flapper disk..don't use a solid grinding wheel
--axle looks like an 81-83
there are three different mini truck axles:
Toyota Mini Truck Front Axle Identification
79-80 no gusset
81-83 short gusset (to u-bolts)
84-85 long gusset (past u-bolts)
ID Toyota Mini Truck axles
79-80 no gusset
81-83 short gusset (to u-bolts)
84-85 long gusset (past u-bolts)
obviously if you pick that thing up you are gonna need new calipers, and disk
might has well do FJ rotors and v-6 calipers and rebuild it
edit: i never understand why people don't cover stuff like axles up...the knuckle balls may clean up ok using a flapper disk..don't use a solid grinding wheel
--axle looks like an 81-83
Last edited by dropzone; 02-04-2010 at 05:55 PM.
02-04-2010, 06:02 PM
#7
Registered User
Thread Starter
I dont mind doing the work but the rust!!!! what about the rust man ! can it be salvaged from the rust ? sadily the pic is from a kid who has the axle up fur sale on craiglist so that is th only pic i have. he is asking $ 240. obo i love to work on my toyota but rust kinda makes me worrie
Trending Topics
02-04-2010, 09:19 PM
#9
Registered User
Join Date: Nov 2008
Location: Logan, UT
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Looks like surface rust to me, whicg could easily be sand blasted or wire wheeled away. Go take a look at it, if the axle shafts slide in smoothly, id say give him 200 cash and call it a deal. if you try to slide the axle shafts in. and they don want to, then thats a good indicator that the housing is bent.
Thread
Thread Starter
Forum
Replies
Last Post
MMA_Alex
86-95 Trucks & 4Runners (Build-Up Section)
25
04-18-2017 05:07 AM
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
08-30-2016 01:03 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM
