YotaTech Forums
Side view of bumper C clamped in place.
Side view of bumper C clamped in place.
0 2025/03/30 16:57:52
Looking down at the mounting points for the bumper to bracket. Two top bolts and two bottom bolts per side.
Looking down at the mounting points for the bumper to bracket. Two top bolts and two bottom bolts per side.
0 2025/03/30 16:57:49
Front view of the bumper on the bracket. The bottom of the bracket is barely visible thanks to the shiny cut edge just beneath the bottom tube. The truck’s too close to the front wall of the shop to get a good front photo right now.
Front view of the bumper on the bracket. The bottom of the bracket is barely visible thanks to the shiny cut edge just beneath the bottom tube. The truck’s too close to the front wall of the shop to get a good front photo right now.
0 2025/03/30 16:57:47
Angled view of mounting bracket. The two squares on either end look like something Gumby might draw up but they do get hidden by the bumper.
Angled view of mounting bracket. The two squares on either end look like something Gumby might draw up but they do get hidden by the bumper.
0 2025/03/30 16:57:45
Here’s the front view of the mount with the two upper bolts installed into the OEM capture nuts on the front cross member.
Here’s the front view of the mount with the two upper bolts installed into the OEM capture nuts on the front cross member.
0 2025/03/30 16:57:43
View from the engine compartment. The tab on the back of the bracket with the small bolt into the front crossmember seems useless but it was quick and easy so it got installed.
View from the engine compartment. The tab on the back of the bracket with the small bolt into the front crossmember seems useless but it was quick and easy so it got installed.
0 2025/03/30 16:57:40
0 2025/03/29 16:47:20
0 2025/03/29 16:47:16
0 2025/03/22 14:04:36
0 2025/03/22 14:04:34
0 2025/03/22 14:04:31
0 2025/03/09 16:58:45
0 2025/03/09 16:55:26
0 2025/03/09 16:52:24
0 2025/03/09 16:49:11
0 2025/03/08 18:16:42
Another front view.
Another front view.
0 2025/03/08 18:14:37
Front view. The truck is close to the front wall of the garage so this picture isn’t the best.
Front view. The truck is close to the front wall of the garage so this picture isn’t the best.
0 2025/03/08 18:14:35
Side view at the approximate finished install height.
Side view at the approximate finished install height.
0 2025/03/08 18:12:36
0 2025/03/08 18:09:19
The stays didn’t quite line up with the stops on the newer model bed so the stays got relocated.
The stays didn’t quite line up with the stops on the newer model bed so the stays got relocated.
0 2025/03/06 18:28:52
The stays didnt quite line up with the stay stops on the newer model bed so the stops got relocated.
The stays didnt quite line up with the stay stops on the newer model bed so the stops got relocated.
0 2025/03/06 18:28:50
The tail gate stays arrived from an eBay seller. Here they are cleaned up and painted.
The tail gate stays arrived from an eBay seller. Here they are cleaned up and painted.
0 2025/03/06 18:28:47
0 2025/02/28 16:17:00
0 2025/02/28 16:16:58
0 2025/02/28 16:16:56
0 2025/02/28 16:16:53
0 2025/02/26 17:53:56
0 2025/02/26 17:51:15
0 2025/02/26 17:49:25
0 2025/02/26 17:43:49
0 2025/02/25 18:34:16
0 2025/02/25 18:34:13
0 2025/02/25 18:27:50
0 2025/02/25 17:59:21
0 2025/02/24 17:22:19
0 2025/02/24 17:22:17
0 2025/02/24 17:22:15
0 2025/02/24 17:22:12
0 2025/02/20 17:07:43