YotaTech Forums
This is a picture with no flange or hub installed.
This is a picture with no flange or hub installed.
0 2015/07/25 10:01:04
Little comparison 33" beside these little guys.
Little comparison 33" beside these little guys.
0 2015/07/22 05:47:12
Check out my 33" tires off my F150! wow they are huge in comparison.
Check out my 33" tires off my F150! wow they are huge in comparison.
0 2015/07/22 05:44:41
I ordered new gaskets and studs from Toyota, I would have used the old studs but I twisted one off. they only take about 250 in/pounds so be careful if your hand tightening. I recommend using a torque wrench.
I ordered new gaskets and studs from Toyota, I would have used the old studs but I twisted one off. they only take about 250 in/pounds so be careful if your hand tightening. I recommend using a torque wrench.
0 2015/07/22 05:44:04
Installed, more pictures to come soon!
Installed, more pictures to come soon!
0 2015/07/22 05:43:09
Looks bad. there was also a couple chunks of the old shift ball seat in there as well(expected). It does look like a lot of chrome in the oil though.. probably the input bearing by what most are saying.
Looks bad. there was also a couple chunks of the old shift ball seat in there as well(expected). It does look like a lot of chrome in the oil though.. probably the input bearing by what most are saying.
0 2015/07/16 08:24:02
Pretty glittery.. I didn't do too many pictures because there are plenty on the site already. I filled from the shift opening on the top of the tran, after draining, after making sure the inspection nut would come off. this Transmission has a couple issues with a whining noise and synchro mesh possibly.
Pretty glittery.. I didn't do too many pictures because there are plenty on the site already. I filled from the shift opening on the top of the tran, after draining, after making sure the inspection nut would come off. this Transmission has a couple issues with a whining noise and synchro mesh possibly.
0 2015/07/16 08:18:13
I used LUKAS oil for this change. 75/90 and one container of the heavier stuff 75/140.
I used LUKAS oil for this change. 75/90 and one container of the heavier stuff 75/140.
0 2015/07/16 08:16:30
look at your truck and decide to take action..
look at your truck and decide to take action..
0 2015/06/21 21:56:10
265246km
265246km
0 2015/06/18 22:38:29
These are what I pulled out.
These are what I pulled out.
0 2015/06/18 22:38:23
0 2015/06/18 22:38:16
0 2015/06/18 22:38:08
I put in Bosch plugs, very noticeable difference in start up and acceleration.
I put in Bosch plugs, very noticeable difference in start up and acceleration.
0 2015/06/18 22:38:02
0 2015/06/18 22:36:28
0 2015/06/18 22:36:19
0 2015/06/18 22:36:11
0 2015/06/18 22:36:01
the piece I'm holding is what you see when you first peel the boot off. push down and turn counter clockwise to remove the shifter.
the piece I'm holding is what you see when you first peel the boot off. push down and turn counter clockwise to remove the shifter.
0 2015/06/18 22:31:04
http://www.off-road.com/trucks-4x4/tech/shift-lever-seat-replacement-18543.html
http://www.off-road.com/trucks-4x4/tech/shift-lever-seat-replacement-18543.html
0 2015/06/18 22:30:20
Leatherman Wingman, and 5/16 socket.. pretty simple.
Leatherman Wingman, and 5/16 socket.. pretty simple.
0 2015/06/18 22:27:48