YotaTech Forums
0 2021/07/15 20:48:09
Underside is a combination of factory rustproofing, dirt and leaking gear oil. This is after degreasing.
Underside is a combination of factory rustproofing, dirt and leaking gear oil. This is after degreasing.
0 2021/07/15 20:48:21
Amp fuse.
Amp fuse.
0 2021/07/15 20:57:42
New Front seal and old dust seal.
New Front seal and old dust seal.
0 2021/07/15 21:08:06
Here are the accurate p/n’s for front and rear.
Here are the accurate p/n’s for front and rear.
0 2021/07/15 21:08:15
Reinstalled. Looking better…
Reinstalled. Looking better…
0 2021/07/15 21:08:27
Joint cover before and after
Joint cover before and after
0 2021/07/15 21:08:38
0 2021/07/15 21:19:00
0 2021/07/15 21:19:13
0 2021/07/15 21:19:23
0 2021/07/15 21:32:53
I’ve got hours into cleaning this front driveshaft.
I’ve got hours into cleaning this front driveshaft.
0 2021/07/15 21:33:05
Good paint, reasonable price.
Good paint, reasonable price.
0 2021/07/15 21:33:18
0 2021/07/18 20:42:01
This tool is perfect for pulling the panel off. Remove the knobs, insert and lightly pull.
This tool is perfect for pulling the panel off. Remove the knobs, insert and lightly pull.
0 2021/08/06 19:31:52
One screw and the switch comes out. The bulb can be accessed from the bottom.
One screw and the switch comes out. The bulb can be accessed from the bottom.
0 2021/08/06 19:39:04
I searched my bag of extra switches and found the cruise control to have the same bulb.
I searched my bag of extra switches and found the cruise control to have the same bulb.
0 2021/08/06 19:39:17
Gotta clean the lens with soap and water.
Gotta clean the lens with soap and water.
0 2021/08/06 19:39:29
0 2021/08/06 19:46:10
0 2021/08/06 19:46:21
0 2021/08/06 19:54:05
Back together. Let there be light!
Back together. Let there be light!
0 2021/08/06 19:56:30
0 2021/08/08 20:01:29
0 2021/08/08 20:01:42
0 2021/08/08 20:01:53
0 2021/08/08 20:03:18
0 2021/08/15 16:52:24
0 2021/08/15 16:56:56
0 2021/08/15 16:57:16
Yuck.
Yuck.
0 2021/08/15 17:12:03
0 2021/08/15 17:12:27
0 2021/08/15 17:12:48
0 2021/08/16 18:41:56
0 2021/08/16 18:42:11
0 2021/08/20 19:30:27
Remove top 4 bolts and one nut. Turning the screw clockwise will push the top cover off.
Remove top 4 bolts and one nut. Turning the screw clockwise will push the top cover off.
0 2021/08/22 18:49:37
Working in a clean, shallow tub helps control the mess and parts. No special tools other than a pair of snap ring pliers.
Working in a clean, shallow tub helps control the mess and parts. No special tools other than a pair of snap ring pliers.
0 2021/08/22 18:49:45
0 2021/08/22 18:58:47
Remove 4 bolts on the valve body and turn the inpt shaft to separate. Prepare for about 44 ball bearings to come falling out.
Remove 4 bolts on the valve body and turn the inpt shaft to separate. Prepare for about 44 ball bearings to come falling out.
0 2021/08/22 18:58:56
Unscrew the input shaft from the power piston. Bearings will fall out! Clean everything. Spray thru the valve control with Brakleen and make sure movement is smooth and not loose. If yours is leaking around the input shaft you will need to disassemble further to change the seal.
Unscrew the input shaft from the power piston. Bearings will fall out! Clean everything. Spray thru the valve control with Brakleen and make sure movement is smooth and not loose. If yours is leaking around the input shaft you will need to disassemble further to change the seal.
0 2021/08/22 19:02:04