I purchased a Toyota pick-up that had this axle under the front of it. The previous owner completely rebuilt this axle from tip to tip and it only has 10-20 miles on it and has never been off-road.

What’s included:

- Rebuilt Wagoner Passenger Side Drop Dana 44
- Brand New 16” Rock Equipment AirShox
- 1.75” x .375” Lower Links
- 1.5” x .25” Upper Links
- 1.5” x .25” Pan-hard
- 2” M.O.R.E Bushings on Frame-End of Links
- 5/8” x ¾” QA1 Rod-Ends on Axle-End of Links
- New Yukon 5.38 Ring and Pinion
- Lock-Right Locker
- Brand New Hubs, Rotors, Calipers, Brake Pads
- New Warn Locking Hubs
- 2” x .5” tierod
- Toyota to Dana 44 Extended Brake Lines
- Brand New Sky Manufacturing Flat Pitman Arm
- New Chevy 1-Ton Rod Ends
- The knuckles have been rotated on this axle also.

I’m asking $1500.00 for everything picked up. I’m happy to ship this on the buyer’s dime. If you’re thinking about Link SASing any kind of vehicle this is a steal of a deal. Because of my stubbornness about not wanting Heep stuff on my Toyota someone could SAVE LOT’S of TIME and MONEY.

PM me if interested, have any questions or would like more pictures.

 

For any 4cyl Tacoma or 3rd Gen 4Runner guys looking to SAS there truck. I have a W56 and 2 good Gear T-Cases you can use to get a Passenger Side Drop and make it easy to put duals in. I also have an IFS steering box.

 

Real interested man, where are you located? Stock shafts?

-Josh

 

I'm in Cumming GA 30040. As far as I know they're stock shafts with new u-joints. U-joint caps are tacked welded on. Let me know if you have any more questions.

 

Umm...that's a passenger side pumpkin. It won't work on a 3rd Gen 4Runner (or any Tacoma)

It will however work on a 2nd Gen 4Runner or Pickup...I'd love to buy this sadly I don't have $1500 for an axle right now.

 

Is this out of the Red 3rd gen pickup (boobed bed, 37" iroks, 1" lift) from pirate? Capable DD project truck?

If so I watched this build and its done right. I'm still throwing around some numbers on my next project and i'll hit you up as soon as I find out.

-Josh

 

I just read that thread on pirate -- I would love to hear what became of the truck and why you (yotaman) removed the axle? Are you redesignin the front end, parting it out, what's up? That was one cool lookin' rig.

Bump for the axle ----

 

I purchased the truck a few months ago.

A short list of my plans:
FZJ80 Axles Front and Rear
Triple 23 spline T-cases (shafts will be cryo’ed)
42” TSL’s
Cab Exo

Look for a build up in a few weeks.

 

sure it will. with enough fabbing...anythings possible. there have been a couple fj80 axles put under 3rd gen runners & taco's. one runner here in bc has 80 axles and theres a red DC taco in calgary running them as well. id imagine the biggest issue would be the xover pipe for the exhaust collector...

bump for some big pimpin setup...id be all over that if i wasnt on the complete opposite side of the country...

 

Sounds awesome -- hurry up so i can see some pics ???

 

Why triple cases?

 

So I can be one of the cool people and say “I have triple cases and 5 sticks”.

I have 3 cases here and it's different so I figure why not. Plus both driveshafts will be the same length.

 

To those interested here is the build on the truck tis came out of. It shows the COMPLETE setup of the link system.... This chit was done right as far as I can tell and someone interested (with $$$) should shach it up. Too bad i'm broke

http://www.pirate4x4.com/forum/showthread.php?t=375105

Bump for ya man.. you wouldnt happen to be looking for a BMW 325is DD Would you?

-Josh

 

BUMP! No one wants to get in on a deal of a life time. This thing needs to go.

 

Sounds like an awesome deal to me !

Bump -- so we can get your project rollin'

 

Bump!!! NEED SOME CASH! Let's get it out of my driveway.

 

Did you get my pm earlier about a yota axle? Send me some more info on this and let me know what it would take to get it out of your driveway. I found a cheap 87 4runner and am having a good time convincing my wife it needs to be in our driveway but I am trying.

 

Bump for a SMOKIN DEAL!!! I'll sell the truck whole to if someone is interested.

 

Got a friend interested on TTORA that wants the whole thing. Have an email you can give me so I can give it to him?