Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

'95 4Runner mods I would do again....:

Thread Tools
 
Search this Thread
 
Old Jul 18, 2006 | 10:04 PM
  #1  
4Mogger's Avatar
Thread Starter
Banned
 
Joined: Feb 2005
Posts: 636
Likes: 0
From: Montrose, CO
'95 4Runner mods I would do again....:

Listed in order of priority:
1. Downey HD coils approx 2" lift. Downey torsion bars.
2. Warn premium manual hubs.
3. Downey oversize air intake
4. Borla cat back exhaust
5. ARB bumper and Warn winch.
6. Siped BFG MT's in the 32" variety on 3 5/8ths backspaced wheels
7. Yakima roof rack/rocketbox or the 2006 equivalent
8. Centerforce dual friction clutch with heavier than stock Centerforce flywheel--assuming you have the manual transmission
9. Junk the sidesteps and get some decent sliders
10. Odyssey battery
11. ERPS rust prevention system (Australian Company)

Mods to avoid

1. Optima batteries
2. Anything made by Jacobs Electronics
3. Any non-OEM Toyota Factory bearing (pilot, throwout, etc, such as those made in China and included in the Downey HD clutch kit )
4. Flex-a-lite electric fan conversion--marginal gain if any and adds an enormous load to an already taxed charging system.

Last edited by 4Mogger; Jul 18, 2006 at 10:06 PM.
Reply
Old Jul 19, 2006 | 04:04 PM
  #2  
anthony1's Avatar
Registered User
20 Year Member
iTrader: (1)
 
Joined: Oct 2003
Posts: 1,561
Likes: 1
From: torrance, CA.
What is it that you din't like about Optima. I have mine since Jan 2001..still starts every time. sometime I'd park it for two weeks at a time.
Reply
Old Jul 19, 2006 | 04:37 PM
  #3  
SteveO's Avatar
Contributing Member
 
Joined: Oct 2002
Posts: 1,843
Likes: 0
From: NM
Hey Mogger.....

Any closer to getting that thing out of the garage?
How's the employment search going?
Reply
Old Jul 19, 2006 | 05:02 PM
  #4  
rockota's Avatar
Registered User
 
Joined: Dec 2003
Posts: 792
Likes: 0
From: Minnesota
Originally Posted by 4Mogger
Listed in order of priority:
1. Downey HD coils approx 2" lift. Downey torsion bars.
2. Warn premium manual hubs.
3. Downey oversize air intake
4. Borla cat back exhaust
5. ARB bumper and Warn winch.
6. Siped BFG MT's in the 32" variety on 3 5/8ths backspaced wheels
7. Yakima roof rack/rocketbox or the 2006 equivalent
8. Centerforce dual friction clutch with heavier than stock Centerforce flywheel--assuming you have the manual transmission
9. Junk the sidesteps and get some decent sliders
10. Odyssey battery
11. ERPS rust prevention system (Australian Company)

Mods to avoid

1. Optima batteries
2. Anything made by Jacobs Electronics
3. Any non-OEM Toyota Factory bearing (pilot, throwout, etc, such as those made in China and included in the Downey HD clutch kit )
4. Flex-a-lite electric fan conversion--marginal gain if any and adds an enormous load to an already taxed charging system.

Oddness... i don't see mog's listed in either of the lists.
Reply
Old Jul 19, 2006 | 05:20 PM
  #5  
toyo22r's Avatar
Registered User
 
Joined: Jan 2003
Posts: 84
Likes: 0
From: Surprise, AZ
What don't you like about Jacob Electronics out of curiosity? Only thing of theirs i've used in their 8.5mm plug wires...

toyo22r@hotmail.com
95 4Runner
St. Louis
Reply
Old Jul 23, 2006 | 09:54 PM
  #6  
4Mogger's Avatar
Thread Starter
Banned
 
Joined: Feb 2005
Posts: 636
Likes: 0
From: Montrose, CO
Originally Posted by anthony1
What is it that you din't like about Optima. I have mine since Jan 2001..still starts every time. sometime I'd park it for two weeks at a time.
If you draw them down hard--say winching a lot or running an electric fan, you will kill them quickly. I have had a redtop die in as little as a year and a yellow top in less than 18 months. The weak Toyota alternator doesn't help matters much. But I would definitely say get an Odyssey battery over the Optima if you are running big electrical loads.
Reply
Old Jul 23, 2006 | 09:56 PM
  #7  
4Mogger's Avatar
Thread Starter
Banned
 
Joined: Feb 2005
Posts: 636
Likes: 0
From: Montrose, CO
Originally Posted by SteveO
Hey Mogger.....

Any closer to getting that thing out of the garage?
How's the employment search going?
Getting close on finishing up the 4Runner. Just finishing the half-exo.
The employment search is going OK. Nothing firm yet. Just enjoying some time off with family. Come Sept. or Oct. and I will start to get worried.
Reply
Old Jul 23, 2006 | 09:57 PM
  #8  
4Mogger's Avatar
Thread Starter
Banned
 
Joined: Feb 2005
Posts: 636
Likes: 0
From: Montrose, CO
Originally Posted by rockota
Oddness... i don't see mog's listed in either of the lists.
Jury is still out on that mod!
Reply
Old Jul 23, 2006 | 10:00 PM
  #9  
4Mogger's Avatar
Thread Starter
Banned
 
Joined: Feb 2005
Posts: 636
Likes: 0
From: Montrose, CO
Originally Posted by toyo22r
What don't you like about Jacob Electronics out of curiosity? Only thing of theirs i've used in their 8.5mm plug wires...

toyo22r@hotmail.com
95 4Runner
St. Louis
I went through 7 omni magnums before I called it quits. They covered each under warranty, but the shipping alone was killing me. Not to mention taking an hour to install each new one and a half hour to pull the fubared one out. They are junk. When they work they work great. But I would never compromise the reliability of a Toyota with their crap again.
Reply
Old Feb 12, 2007 | 09:02 AM
  #10  
boosted313's Avatar
Registered User
 
Joined: Feb 2007
Posts: 32
Likes: 0
From: NH
what about the flex a lite we did it to my buddys s10 and it made a nice power gain....
Reply
Old Feb 12, 2007 | 09:18 AM
  #11  
chimmike's Avatar
Contributing Member
 
Joined: Jan 2007
Posts: 1,521
Likes: 0
From: SRQ, FL
which odyssey battery do you have now?
Reply
Old Feb 12, 2007 | 10:07 AM
  #12  
thook's Avatar
Registered User
 
Joined: Sep 2005
Posts: 8,656
Likes: 16
From: NW Ark on wooded ten acres...Ozarks at large!
Originally Posted by 4Mogger
Mods to avoid
3. Any non-OEM Toyota Factory bearing (pilot, throwout, etc, such as those made in China and included in the Downey HD clutch kit )
This wouldn't include products from Marlin, would it?
Reply
Old Feb 12, 2007 | 10:26 AM
  #13  
thook's Avatar
Registered User
 
Joined: Sep 2005
Posts: 8,656
Likes: 16
From: NW Ark on wooded ten acres...Ozarks at large!
Oh yeah, and why would you go with WARN hubs over Aisin?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
icentropy
86-95 Trucks & 4Runners
10
Jul 11, 2015 07:21 AM
tpd143
General Vehicle Related Topics (Non Year Related)
1
Jul 7, 2015 09:06 AM
Nickdigg
86-95 Trucks & 4Runners
1
Jul 7, 2015 06:04 AM




All times are GMT -8. The time now is 01:38 AM.