Hi Everyone,
I just wanted to let you know that URD short shifter for the 5VZE trucks works with our V6 second gens. I've installed one in my 95 4Runner and it is a great upgrade and a rock solid design. It's kinda of a $pendy upgrade but it fixed all my shift problems with a 2" 4Crawler body lift. The shifter is now in the factory position or close to it in my Runner. Anyways I just wanted to pass this info along. Make sure you have the R150F trans in your ride.

Shifter link

,Thomas

 

nice how hard was the install and

 

Yeah, wheres the pics? How did it end up near the factory position?

 

Yeah do show and tell????

 

This Thread started it and then I did some research. From the research I've done the V6 (8/88) and up use manual R150F transmissions . This is the same transmission Gadget designed one of his short shifters for .
So with that being said I couldnt resist trying one in my Runner you know charged and all .
Anyways here is the install instruction's Here

The pictures of my install look very much like the install directions.

Oh YEAH, The install was butter and the result was cake ! maybe 30 minutes at the most..

,Thomas

 

The short shifter kit moves your shifter higher about an inch this will somewhat make up for the body lift . Not only is it a faster shift it also compensates for the angle of your shifter after your body lift. The kit also shortens your stroke by about 40% so you can get in gear faster.

,Thomas

 

You can see the lift block and shifter extension in these pictures

 

looks like a pretty easy install may have to buy one when i get the cash