Hey.
I would like to get some ideas from the 3rd generations out there with lifts and larger tires with stock wheels and aftermarket wheels. If ya post please include your tire size, lift, etc. I want to go alittle higher on mine and I will be due for a tire purchase in a few months.

ThanX a bunch.

 

look in the community section for 3rd gen truck profiles

oh yeah and DONT post in anyone's profile!

bob

 

I just lifted my 3rd gen runner and put 285's on it...Heres a link to the thread, showing before and after pics...Except my new bumper hasnt arrived yet so the front end is bare heh.

https://www.yotatech.com/forums/f31/ome-lift-installed-no-bumper-65735/

 

01 4runner
perf. products lift springs.
265/75 mt/rs.

 

http://img76.imageshack.us/my.php?image=dscf01930qk.jpg

01 4Runner
2" Cornfed spacers
265/75R16 Firestone Destination MT's

 

currently
~2.5" suspension lift
1.5" body lift

(pictured but coming soon)
315/75/16 Goodyear MTRs
Beadlocked Blackened Toyota wheels

 

You could always go the route I did with just a little lift.

 

cubuff4runner, you need to talk to my wife and explain to her that the "little" lift I want to install on her 4runner is just what she needs. She has this aversion to me and my sawzall for some reason though. I don't get it? Anybody know what the problem is with her?

 

Make her think that it was her idea and act like you don't want to do it... then she'll let you! hahahah

 

When I did my 3" lift the my wife liked mine and she drove it quite a bit. Now with the 9" lift she doesn't like it because it is too hard to get into. She still drives it though.

 

Thanks guys for the pics. I did look in the picture archives but I knew there were alot more people with 3rd generations out there than what the picture page had.

Cubuff4runner: BADASS ! People like you give us guys with little lifts wanting to go higher !

I am pondering OME lift or just spacers. Its going to be a budget lift mainly for looks and for some minor trail riding, etc.

My main concern is trying to get a tire / wheel combo that will push the tires out even with my Limited wheel flares. I hate how the tires look tucked in right now with my 265's.
CHEERS !!! keep em coming!

 

16x8 4.5" BS w/ 265/75 would be just the ticket. Its what I have (in storage, waiting for new valvestems), and it looks juuuuust right.

 

Cool...Throw a pic up if when ya get them on. I think I am going to go with some 285's this time around, once I put another 2 inches of lift on??? Sears had some Generals on sale. Still lookin.

 

Generals=ÅÅÅÅ. I have a set ont here now. Theyre about 2 months old (if that), abotu 3k. Im halfway throught he thread already. They seem to do well off road htough.

General Ameritrac SUV 275/70R16

Heres an old pic of when I had my wheels on last year






Ill get better pics when I get them on in 2 weeks.

 

Like this?



see my suspension & equipment pages at http://4rnr.net

wheels: lexus LX 450 alloy wheels. 16x8 with 4.5" backspacing

tires: 305/70-16 Goodyear MT/R's (approx 33.50x12.50-16)

front: tundra trd front coils w/ two topout spacers and ome N91s struts

rear: downey 2.5/3.5 lift coils w/ 3/4" top spacers and ome N86 struts


https://www.yotatech.com/forums/f2/new-suspension-setup-trd-front-lift-3rd-gen-4runner-41848/

 

i thought those wheels had 4.5" backspacing

 

Bamacham, yeah...thats what I am talkin about. Good pics.

Gangas, thanks for the heads up on the gernerals tread. You have me looking at staying with BFG's.

 

Sorry about the first pic... was trying to do something to it, and ended up wrecking the photo. You get the point














2.5" suspension
2" RB Body lift
285/75/r16 Khumo MT's

 

yeah, they are... :pat:

 

hey cubuffrunner where was this pic taken http://community.webshots.com/photo/...57509265VAerTy