The Fab Shop Tube buggies, armor protection and anything else that requires cutting, welding, or custom fab work

"05 Tacoma SAS

Thread Tools
 
Search this Thread
 
Old Jun 30, 2005 | 08:10 PM
  #1  
awsumdc's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 60
Likes: 0
"05 Tacoma SAS

Some of you may Have heard already but Jason, Corey and myself of DeMello-Offroad are knee deep in SASing my '05 Tacoma. It has 3,600 miles on it. It is a 4x4 TRD SR5 Sport Double Cab and it's silver. Here is a link to where we will periodically put "some" pictures of it. Unfortunately they will be few and far between because we have an agreement with 4wd Toyota owner magazine not to share too many pictures since they are doing a step by step build up of the truck in their new magazine. It will be featured in thier premier issue so stay tuned.

Here is a link that will be updated from time to time. press it then go to SAS.

http://community.webshots.com/user/awsumdc



Wyatt Scott
DeMello-Offroad
Reply
Old Jun 30, 2005 | 08:13 PM
  #2  
Rivalred's Avatar
Registered User
 
Joined: Jul 2004
Posts: 1,386
Likes: 0
From: Michigan
Your so lucky... I have a DC Silver PreRunner and want to build it up...
Reply
Old Jun 30, 2005 | 08:16 PM
  #3  
awsumdc's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 60
Likes: 0
Thanks, At first it was scary but now it's exciting! If you go to the Rock Jock 60 album you'll see what we're putting under it.

Last edited by awsumdc; Jun 30, 2005 at 08:17 PM.
Reply
Old Jun 30, 2005 | 08:20 PM
  #4  
User 051420's Avatar
Contributing Member
 
Joined: Jan 2004
Posts: 3,534
Likes: 0
Think it'll void the warranty?
It's good to see somebody breaking ground.

Last edited by User 051420; Jun 30, 2005 at 08:26 PM.
Reply
Old Jun 30, 2005 | 08:28 PM
  #5  
awsumdc's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 60
Likes: 0
<<<<Think it'll void the warranty?>>>>

Naaahhhh! it's just alittle chrome here and some paint there. Should be no problem at all............

by the way, Thanks.

Last edited by awsumdc; Jun 30, 2005 at 08:29 PM.
Reply
Old Jun 30, 2005 | 08:32 PM
  #6  
Vato Loco's Avatar
Registered User
 
Joined: May 2002
Posts: 3,644
Likes: 0
From: Hamilton, ON
You have balls...
Reply
Old Jun 30, 2005 | 08:37 PM
  #7  
RobT2k's Avatar
Registered User
 
Joined: Nov 2002
Posts: 927
Likes: 0
From: San Diego
From the pic of the axle, it looks like you are gonna go with a coil-over/linked suspension?
Reply
Old Jun 30, 2005 | 08:42 PM
  #8  
awsumdc's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 60
Likes: 0
<<<From the pic of the axle, it looks like you are gonna go with a coil-over/linked suspension?>>>

You are right. we are using 14" Bilstien coilovers in the fron and leaves in the rear.
Reply
Old Jun 30, 2005 | 09:50 PM
  #9  
CoedNaked's Avatar
Registered User
 
Joined: Apr 2004
Posts: 1,475
Likes: 1
From: Vancouver, British Columbia, Canada
Yup, I agree - you DO have balls.
Reply
Old Jul 1, 2005 | 05:12 AM
  #10  
awsumdc's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 60
Likes: 0
Originally Posted by Vato Loco
You have balls...
thanks. It was scary at first! But now it should all come together pretty good.
Reply
Old Jul 1, 2005 | 05:14 AM
  #11  
awsumdc's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 60
Likes: 0
Originally Posted by CoedNaked
Yup, I agree - you DO have balls.
Thanks!
Reply
Old Jul 1, 2005 | 07:55 AM
  #12  
Praufet's Avatar
Contributing Member
 
Joined: May 2003
Posts: 833
Likes: 0
From: Fort Worth/College Station, TX
I could be wrong, but aren't balls a requisite for being male?
Reply
Old Jul 1, 2005 | 08:05 AM
  #13  
muddy_feet's Avatar
Registered User
 
Joined: Feb 2004
Posts: 147
Likes: 0
From: Brinson, Georgia
After it is finished I would take it back to the dealer and say, "I was doing some work and was using my haynes but it doesn't look like anything in the pictures? "think you guys can help me out?".
Reply
Old Jul 1, 2005 | 10:03 AM
  #14  
calg3's Avatar
Registered User
 
Joined: Jul 2003
Posts: 1,045
Likes: 0
From: Old Line State
Originally Posted by muddy_feet
After it is finished I would take it back to the dealer and say, "I was doing some work and was using my haynes but it doesn't look like anything in the pictures? "think you guys can help me out?".
The look on the dealers' personnel faces would be priceless. Cool project, can't wait to see it all finished up.


Reply
Old Jul 1, 2005 | 03:23 PM
  #15  
slyang1012's Avatar
Registered User
 
Joined: Feb 2004
Posts: 561
Likes: 0
From: Diamond Bar, CA
maybe after your done with the taco, u can do my 04 Tundra?





.... how much would u charge to weld up everything?
Reply
Old Jul 1, 2005 | 06:02 PM
  #16  
waskillywabbit's Avatar
Banned
iTrader: (-1)
 
Joined: Jul 2003
Posts: 3
Likes: 20
I hope you don't have any warranty claims...cause your dealer could certainly play hard "BALL" with your balls and then you'd be neutered. I would think your insurance company and the loan holder would be the ones I would worry about finding out you are completely devaluing a brand new vehicle that they have money invested in. Most have a holy cow if you put a lift on them...imagine what they'll voit if they see that!

"The difference between foolishness and bravery is that the latter didn't get killed."

Good luck.


Last edited by waskillywabbit; Jul 1, 2005 at 06:08 PM.
Reply
Old Jul 1, 2005 | 06:11 PM
  #17  
NCSU-4runner's Avatar
Contributing Member
 
Joined: Apr 2003
Posts: 1,579
Likes: 0
From: Raleigh NC
i would certainly hope anyone doing a modification that extreme wouldnt owe any money on the vehicle.

Originally Posted by waskillywabbit
I hope you don't have any warranty claims...cause your dealer could certainly play hard "BALL" with your balls and then you'd be neutered. I would think your insurance company and the loan holder would be the ones I would worry about finding out you are completely devaluing a brand new vehicle that they have money invested in. Most have a holy cow if you put a lift on them...imagine what they'll voit if they see that!

"The difference between foolishness and bravery is that the latter didn't get killed."

Good luck.

Reply
Old Jul 1, 2005 | 07:55 PM
  #18  
awsumdc's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 60
Likes: 0
Originally Posted by waskillywabbit
I hope you don't have any warranty claims...cause your dealer could certainly play hard "BALL" with your balls and then you'd be neutered. I would think your insurance company and the loan holder would be the ones I would worry about finding out you are completely devaluing a brand new vehicle that they have money invested in. Most have a holy cow if you put a lift on them...imagine what they'll voit if they see that!

"The difference between foolishness and bravery is that the latter didn't get killed."

Good luck.

truck will be paid for before it's finished in September. not worried about the dealer or the Loan company.

Last edited by awsumdc; Jul 1, 2005 at 08:04 PM.
Reply
Old Jul 1, 2005 | 07:56 PM
  #19  
awsumdc's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 60
Likes: 0
Originally Posted by NCSU-4runner
i would certainly hope anyone doing a modification that extreme wouldnt owe any money on the vehicle.
by the time it's finished you'ed be right.
Reply
Old Jul 1, 2005 | 08:01 PM
  #20  
awsumdc's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 60
Likes: 0
Originally Posted by slyang1012
maybe after your done with the taco, u can do my 04 Tundra?





.... how much would u charge to weld up everything?
Bring it by and don't forget your your credit card. It depends on what your doing. We're putting coils on this in the front and a Dana 60 with leaves in the rear with a bunch of other stuff so it's just a matter of what your after.

We're in Santa Ana so go to DeMello-Offroad.com and get the address and stop by. I'll actually be working on it tomorrow (Saturday) until about twelve. You can come check it out in person.
Reply



All times are GMT -8. The time now is 12:14 AM.