When making half doors..
Feb 24, 2005 | 11:38 AM
#1
Thread Starter
Registered User
Joined: Oct 2004
Posts: 1,230
Likes: 0
When making half doors..
When you made your half doors, where did you put the handel on the INSIDE of the door so you could open the door? Did you have to fab anything, or just move the handel somewhere? Thanks, pics would be great. I LOOKED ON PIRATE AND SAW A WHOLE THREAD ON HALFDOORS, BUT NOTHING ON WHERE TO RELOCATE THE HANDEL AND IF FAB WORK WAS NEEDED ON THE LATCH.
Feb 24, 2005 | 12:10 PM
#2
Registered User
Joined: Feb 2005
Posts: 1,059
Likes: 0
From: Ohio
Originally Posted by Tacoma750
When you made your half doors, where did you put the handel on the INSIDE of the door so you could open the door? Did you have to fab anything, or just move the handel somewhere? Thanks, pics would be great. I LOOKED ON PIRATE AND SAW A WHOLE THREAD ON HALFDOORS, BUT NOTHING ON WHERE TO RELOCATE THE HANDEL AND IF FAB WORK WAS NEEDED ON THE LATCH.
There is some small fab work to do, but not much, cut a hole for the new handle and shorten the cable/rod that pulls the latch.
I'll take some pics soon.
Jutty
Feb 24, 2005 | 04:28 PM
#3
http://www.pirate4x4.com/forum/showt...86#post2506986
Look there...more than you will ever need to know or even want to know about half doors.
Look there...more than you will ever need to know or even want to know about half doors.
Thread
Thread Starter
Forum
Replies
Last Post
djpg2000
Tires & Wheels
11
Nov 11, 2020 04:56 AM
HookahRoo
86-95 Trucks & 4Runners (Build-Up Section)
4
Jul 20, 2015 07:06 PM
mYnAmEiSmUd
95.5-2004 Tacomas & 96-2002 4Runners
2
Jul 20, 2015 06:48 AM
Hamonacracker
86-95 Trucks & 4Runners
7
Jul 17, 2015 08:33 AM
