95.5-2004 Tacomas & 96-2002 4Runners 4th gen pickups and 3rd gen 4Runners

is it ok to revert back to dino oil from synthetic blend?

Thread Tools
 
Search this Thread
 
Old Jan 20, 2005 | 10:47 AM
  #1  
Amir904's Avatar
Thread Starter
Contributing Member
 
Joined: Apr 2003
Posts: 847
Likes: 0
From: Boston
is it ok to revert back to dino oil from synthetic blend?

the 85 4runner i just bought has been getting synthetic blend oil changes. is it ok to revert back to dino oil? i hear once u change to full synthetic, its not a good idea to go back to dino. does the same hold true for synthetic blend?
Reply
Old Jan 20, 2005 | 10:48 AM
  #2  
WATRD's Avatar
Contributing Member
 
Joined: Oct 2002
Posts: 5,089
Likes: 0
From: Duvall, WA
People have reported additional drippage from already existing drips going in either direction, but functionally, there should be no problems. Both synth and dino contain additives to be more friendly to seals, so the old problem of drying them out is not a problem anymore. If anything, the change back to dino should be easier than the swap to synth because you don't have all the crud getting cleaned out that you have when you go from dino to synth.
Reply
Old Jan 20, 2005 | 11:04 AM
  #3  
ChickenLover's Avatar
Registered User
 
Joined: Apr 2004
Posts: 2,583
Likes: 1
From: NV
You should be alright. I switched back to dino after my full synthetic started leaking when the engine was pushed hard. I haven't had so much as a drop leak out after the switch back to dino 20k ago.
Reply
Old Jan 20, 2005 | 11:10 AM
  #4  
HaveBlue's Avatar
Contributing Member
 
Joined: Jul 2002
Posts: 2,657
Likes: 0
From: Colorado
You'll be fine, expecially since you're switching from a blend.
Reply
Old Jan 20, 2005 | 11:16 AM
  #5  
sherri_girl's Avatar
Registered User
 
Joined: Dec 2002
Posts: 205
Likes: 0
From: KAUAI, HAWAII
What brand of synth are you guys using?
Reply
Old Jan 20, 2005 | 11:25 AM
  #6  
Amir904's Avatar
Thread Starter
Contributing Member
 
Joined: Apr 2003
Posts: 847
Likes: 0
From: Boston
almost 40% use Mobil 1, check it out
https://www.yotatech.com/forums/show...ight=motor+oil
Reply
Old Jan 20, 2005 | 11:31 AM
  #7  
WATRD's Avatar
Contributing Member
 
Joined: Oct 2002
Posts: 5,089
Likes: 0
From: Duvall, WA
Originally Posted by sherri_girl
What brand of synth are you guys using?
Amsoil all around in my rigs.
Reply
Old Jan 20, 2005 | 11:32 AM
  #8  
sherri_girl's Avatar
Registered User
 
Joined: Dec 2002
Posts: 205
Likes: 0
From: KAUAI, HAWAII
Good Choice
Reply
Old Jan 20, 2005 | 11:38 AM
  #9  
kyle_22r's Avatar
Registered User
 
Joined: Mar 2003
Posts: 3,981
Likes: 4
From: Lacey, WA
i've heard stuff about amsoil's viscosity increasing over time?

after a couple thousand miles on 5w30 dino oil in my new engine, i think i'm going to try some shell rotella 5w40 synthetic.
Reply
Old Jan 20, 2005 | 02:30 PM
  #10  
WATRD's Avatar
Contributing Member
 
Joined: Oct 2002
Posts: 5,089
Likes: 0
From: Duvall, WA
Originally Posted by kyle_22r
i've heard stuff about amsoil's viscosity increasing over time?
News to me I have been using it for a few years and the oil analysis has never indicated that problem. Got links?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigjstang
86-95 Trucks & 4Runners
21
Jun 2, 2025 03:56 PM
Yota.Jay
86-95 Trucks & 4Runners
3
Jul 23, 2015 08:08 PM
Gamble_STi
86-95 Trucks & 4Runners
2
Jul 7, 2015 07:54 PM
HRDC0R19
86-95 Trucks & 4Runners
3
Jul 5, 2015 06:43 PM
elwood73
86-95 Trucks & 4Runners
0
Jul 5, 2015 07:07 AM




All times are GMT -8. The time now is 08:15 AM.