why is it so hard to find a 98 4runner indiglo gauges..not even on ebay mostly 99-001 and 90-95..what happen to the 96-98...can someone link me to a place online may have them for cheap..

 

Here:
Indiglo

http://cgi.ebay.com/ebaymotors/ws/eB...category=33677

reverse

http://cgi.ebay.com/ebaymotors/ws/eB...category=33677

Personally I like reverse. Matches a blue led switch better. When you look on ebay put a space between 4 and runner.

 

thanks man.....will do..now gonan be lookin for intakes..

 

Pretty sure unless you just like the looks intakes are a waste of $$$. Gadget did a comparison, and an amsoil filter with a deckplate or elbow gone was better than a K&N tube/ cone

And something to note is that the gauges will have a prnd21 on the dials. Not a big deal, just something to be aware of

 

where can i get a deckplate...and what is the elbow gone...how much does amsoil filter usually cost..sorry jess got my rig like a week ago..trying to get my rig nice and clean and also get the best gas milages ..specialy how gas prices are soo high...

 

Probably get a deckplate on ebay. Rather than do that, its easier to just take out the tube on the side of your airbox. Looking from the front, it's on the left side and it runs into the fender. Here is how to do it. Takes 5-10 minutes.
http://www.4runners.org/articles/airbox/
Though I just took out the part that bends and left the rest of the stuff up in there in case I want to put it back in later. If you are going to supercharge I think its best not to mess with it.
As for the amsoil, there are a couple guys on here that sell them. I think they are like 40-50 bucks, but when you consider it's reusable it saves money over a year or two.

 

Just got my euro gauges from procarparts.com.

Nice gauges, but:

-PRND is on the tach, and my 97 doesn't have that, so they are forever dark
-Bottom row of indicators is out of sequence, so I left it out (what's with that??)
-Left hand gauge (temp) was too high, so I trimmed a bit off the bottom and taped in place
-I don't like the "halo" on the inner circles at night, or the blue numbers in the daylight, but I expected that (wish I had gotten the regular gauges now)

Also get 3 blue 194 bulbs to replace the green condom bulbs at the same time. (You're going to hate the greens with the indies)

My 2 cents

 

I got my gauges for the same place for like $40 a year ago. I had to walow out he gauge hole but other than that, they are fantastic. They make me smile every time I look at em, especilay at night. Check out page six of my home page (in sig) for a few pictures of the install:

 

I have a brand new spare deckplate laying around if someone wants it.. its 4" PM me

 

You can get a deckplate for around $10 at most boat shops. Just call around. It took me three calls. Shipping could cost you more.

 

You can have mine for like $7 shipped.. I paid more than that last week but have no use for it now.. just sitting here

 

Axo, how is that brown bread stuff? Did just doing the doors make a difference w/ road noise?

 

The brown bread did help. The doors now have a real solid sound and feel when I close them. Resonance from the speakers is improved. Road sound was reduced. I am currently planning to do the entire interior like Bob_98RS did. I've been researching to see if there are better materials.

FYI, It took about 3/4 of a day to do the doors. It was a fairly easy task.

 

I assume brown bread is like dynamat?

 

I was considering getting some second skin stuff since there is a decent discount plus free shipping for yotatech people.