Moving front axle forward
Mar 12, 2019 | 04:16 PM
#1
Thread Starter
Registered User
Joined: Mar 2015
Posts: 112
Likes: 12
From: Goodyear, AZ
Moving front axle forward
Quick tech question for everyone. I know to push the front axle forward on Toyota pickups and easy way to do this is run the rear springs up front. Right now I have a procomp 4” lift front and rear. Would it be possible to buy another set of procomp springs for the rear and put them up front? It would do the same thing right? Would the lift it give be the same? I am having fender clearance issues and don’t was to cut them up.
Mar 12, 2019 | 04:54 PM
#2
Cody
How about a body lift?
I know if you could drill new holes in the springs and relocate the pins you would be able to move it forward "BUT" your torque rod would have to be lengthened also. Not sure if the sway bar would work either.
How about a body lift?
I know if you could drill new holes in the springs and relocate the pins you would be able to move it forward "BUT" your torque rod would have to be lengthened also. Not sure if the sway bar would work either.
Thread
Thread Starter
Forum
Replies
Last Post
ohio4runner4x4
95.5-2004 Tacomas & 96-2002 4Runners
12
Jul 28, 2009 04:24 AM
chimmike
Solid Axle Swaps, All Years
8
Apr 16, 2007 05:10 PM
