Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Bought me a 90 ext Cab 4x4

Thread Tools
 
Search this Thread
 
Old May 14, 2017 | 08:18 AM
  #1  
Chino_rx3's Avatar
Thread Starter
Registered User
 
Joined: May 2017
Posts: 6
Likes: 0
Bought me a 90 ext Cab 4x4

Hey guys I bought this 1 owner 4x4 from my buddy . He kept it up but just decided to buy a 4 door 09 Tacoma 4x4 and sold me his pride and joy . He just got tired of fixing little issues here and there he said the older he got the less he wanted to work on pick up truck . Me and my brother have been after his truck for many years and guess who got it . I'm going to be working on it maybe in a month or so I have some other cars I need to sell to put some money on this Toy . Want it done right so came into this forum for some help . Hope you like it .

My New Pup Simba , my wife got him after my old blue pit passed away in January . I had him 11 years

Reply
Old May 19, 2017 | 01:45 PM
  #2  
BlackPearl808's Avatar
Registered User
10 Year Member
Liked
 
Joined: Jan 2016
Posts: 159
Likes: 26
From: Big Island, Hawai'i
cheeee! that buggah is cherry
Reply
Old May 20, 2017 | 05:58 AM
  #3  
rattlewagon's Avatar
Registered User
15 Year Member
Liked
 
Joined: Oct 2009
Posts: 4,832
Likes: 332
From: Northfield, Vermont
Looks reaaaal clean! How many miles? Whats your plans for it?
Reply
Old May 20, 2017 | 10:37 AM
  #4  
dropzone's Avatar
Fossilized
iTrader: (6)
 
Joined: Oct 2005
Posts: 19,771
Likes: 456
From: PNW
Ouch, that is a lot of rust. How are the rockers, floor and the frame?
Reply
Old Jun 27, 2017 | 04:01 PM
  #5  
Chino_rx3's Avatar
Thread Starter
Registered User
 
Joined: May 2017
Posts: 6
Likes: 0
Originally Posted by rattlewagon
Looks reaaaal clean! How many miles? Whats your plans for it?
Planning on making it run and see where I go from there . Rust issues like always ok all older Toyota's .
Originally Posted by dropzone
Ouch, that is a lot of rust. How are the rockers, floor and the frame?
Yep rusty ,
Reply
Old Jun 27, 2017 | 04:05 PM
  #6  
Chino_rx3's Avatar
Thread Starter
Registered User
 
Joined: May 2017
Posts: 6
Likes: 0
Need a new bed and fuel sending unit


Does anyone know what other newer year bed I can put on my truck , is pretty rusty .

And does anyone know if a sending unit from a 1995 4 runner will work on my gas tank ?

And if upper control arms from 95 4 runner will work on my truck . I'm new to this and I've search and couldn't find anything they look very similar
Reply
Old Jun 27, 2017 | 07:03 PM
  #7  
scope103's Avatar
Registered User
15 Year Member
 
Joined: Sep 2007
Posts: 8,380
Likes: 871
From: San Francisco East Bay
Try a dealer site (my favorite is http://parts.lakelandtoyota.com/), find the part you're looking for, then click on "What this fits."

( http://parts.lakelandtoyota.com/p/TO...806635110.html
says your upper control arms are the same for trucks from 1989 through 1998!)
Reply
Old Jun 27, 2017 | 07:10 PM
  #8  
dropzone's Avatar
Fossilized
iTrader: (6)
 
Joined: Oct 2005
Posts: 19,771
Likes: 456
From: PNW
Originally Posted by Chino_rx3

Does anyone know what other newer year bed I can put on my truck , is pretty rusty .

And does anyone know if a sending unit from a 1995 4 runner will work on my gas tank ?

And if upper control arms from 95 4 runner will work on my truck . I'm new to this and I've search and couldn't find anything they look very similar
89-95 bed fits no issue, 84-88 Will fit but have slight alignment issues and looks fugly.
a-arms should fit with out issue. Too bad I just dumped the leftover stuff from when I did my SAS, would have sent them to you if you covered shipping
Originally Posted by scope103
Try a dealer site (my favorite is http://parts.lakelandtoyota.com/), find the part you're looking for, then click on "What this fits."

( http://parts.lakelandtoyota.com/p/TO...806635110.html
says your upper control arms are the same for trucks from 1989 through 1998!)
I have bought parts from them. Interesting about arms being the same 89-98. I had a 97 Taco and thought the uppers were shaped slightly different for the coil over. Learned something new. I wonder what changed in 99.
Reply
Old Jun 27, 2017 | 08:05 PM
  #9  
scope103's Avatar
Registered User
15 Year Member
 
Joined: Sep 2007
Posts: 8,380
Likes: 871
From: San Francisco East Bay
Originally Posted by scope103
... says your upper control arms are the same for trucks from 1989 through 1998!)
Originally Posted by dropzone
... I have bought parts from them. Interesting about arms being the same 89-98. I had a 97 Taco and thought the uppers were shaped slightly different for the coil over. ....
Did I say all trucks? Did I say Tacoma? ;^)

The '98s listed on that website were T100s. Tacoma wasn't in that list, so I don't doubt they were different.
Reply
Old Jun 28, 2017 | 09:50 AM
  #10  
Chino_rx3's Avatar
Thread Starter
Registered User
 
Joined: May 2017
Posts: 6
Likes: 0
Originally Posted by scope103
Try a dealer site (my favorite is http://parts.lakelandtoyota.com/), find the part you're looking for, then click on "What this fits."

( http://parts.lakelandtoyota.com/p/TO...806635110.html
says your upper control arms are the same for trucks from 1989 through 1998!)
Originally Posted by dropzone
89-95 bed fits no issue, 84-88 Will fit but have slight alignment issues and looks fugly.
a-arms should fit with out issue. Too bad I just dumped the leftover stuff from when I did my SAS, would have sent them to you if you covered shipping

I have bought parts from them. Interesting about arms being the same 89-98. I had a 97 Taco and thought the uppers were shaped slightly different for the coil over. Learned something new. I wonder what changed in 99.
Originally Posted by scope103
Did I say all trucks? Did I say Tacoma? ;^)

The '98s listed on that website were T100s. Tacoma wasn't in that list, so I don't doubt they were different.
thanks guys for all your help I found a guy with a new bed with tail gate very little rust and he going to check for other stuff for me too . Can't wait to get this project going .
Reply
Old Jun 28, 2017 | 05:13 PM
  #11  
Chino_rx3's Avatar
Thread Starter
Registered User
 
Joined: May 2017
Posts: 6
Likes: 0
My little helpers

My two little ones helping me while I pull it into the drive way to get some work started .
Reply



All times are GMT -8. The time now is 08:45 AM.