I started my build. It a 2006 toyota tundra 4.7 swap into an 1986 toyota pickup custom cab 4x4. Here are some pictures, will update as i go

 

 

i'm still trying how to load pictures will be more soon

 

 

Sweet truck! Any other pictures?

Good luck with the build, the 2UZ is a really nice motor.

 

pulling back out the finish welding exhaust.

 

here is a shot of the modified oil pan



had to weld in v band clamp because of space and easier to remove and install while in the truck

 

heat wraped the exhaust and reinstalled it back in, and should be the last time it comes out.






radiator to motor clearance, had to modified to radiator core support





i'm using 06 tundra auto transmission and to keep it passenger side drop I'm using low range adapter kit and a 1987 pickup transfercase

 

here is some updates. Had to redo to radiator so that i can run fans on the inside and have room in the front for a/c and transmission cooler.


looks like it hits but it over laps

 

Going to be using the 05 sequoia cluster and started on wiring.


Got exhaust done









front driveshaft on had pound to transmission pan a little to clear it





i about 90% done. Hopefully start some time this week will try to get a video of it started up

What i need left is a steering with column shifter,shifter cable,and bench seat. My truck was originally manual and am converting to auto. I been looking for awhile now with no luck. Let me know if anyone has these parts.

 

Finally started it.. The wire was a mess but got though it. will post videos later

 

[YOUTUBE] [/YOUTUBE]

[YOUTUBE] [/YOUTUBE]

 

all washed up.

 

That's awesome! Congrats on the completion.

 

cant seem to pin point that adapter on there site ? .. any help


.

 

i can't seem the to find it too. but it's the same one as mc

https://www.marlincrawler.com/transf...v8-drivetrains

 

cool .. thanks


.

 

The truck runs great so far. Today i took the truck to get weighted and it comes in at 4300 lbs without driver. I will get some in cab and drive videos.

 

How much did this whole project cost you? I've got a '90 4runner i've been wanting to do this with for a while

 

https://www.facebook.com/christopher.moua.5/videos/1451838238173829/