96 4runner reversed polarity
#1
96 4runner reversed polarity
My 4runner was in the way and wife went to move it while I was gone...long story short she put the charger on backwards. I replaced all blown fuses i could find. After, i still have no interior acc. I noticed the 100amp alt fusible link was fried. I tried just crossing up the fusible link. When i did this the starter solenoid clicked continuously with no key in the ignition!!! Also i noticed the starter relay was warm so i swiched it out no change. Any ideas?
#3
Registered User
iTrader: (1)
Joined: Apr 2009
Posts: 13,381
Likes: 100
From: I live in New Tripoli Pa out in the woods
Sounds to me like it is time to up grade to a newer model wife!!When things like this happen no telling just what can happen it might be the solenoid contacts are welded closed.

Lets hope you did not fry the igniter and ECM
Good luck Time to break out the meter and trouble shoot.
#4
Untold damage was done. You will have to inspect all of the harness to ever really be safe. How long she leave it on and at what amp rating on charger.....like fast charge...slow....etc..?
At least check continuity on everything you can. You would be surprised how quick a car will go up in flames from electrical problems. Hell it could have burned right there in the driveway this time.
At least check continuity on everything you can. You would be surprised how quick a car will go up in flames from electrical problems. Hell it could have burned right there in the driveway this time.
Thread
Thread Starter
Forum
Replies
Last Post
BeMiceElf
Misc Stuff (Vehicle Related)
7
Oct 10, 2015 09:40 PM
mengquis
95.5-2004 Tacomas & 96-2002 4Runners
1
Jul 13, 2015 10:39 AM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 10, 2015 06:21 PM
madxman21
86-95 Trucks & 4Runners
2
Jul 9, 2015 10:26 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM



