96 tacoma heating issues
Feb 2, 2014 | 05:29 PM
#1
Thread Starter
Registered User
Joined: Feb 2014
Posts: 13
Likes: 0
From: Oregon Coast
96 tacoma heating issues
So I bought a 96 Tacoma a few weeks ago and noticed that the heater wouldn't get hot, the blower works great tho, I started pulling the dash apart and noticed that the cable that is connected to the tempurature knob was disconnected at the other end of the cable not where it connects to the knob but the other end, anyone have any idea where that connects to?
Feb 4, 2014 | 01:14 AM
#2
More then likely the heater control valve, not sure on a taco. On my 96 4runner the cable from the heater control inside the truck runs all the way thru the firewall and to the valve. My valve sits in middle just above the engine mounted to the firewall has some hoses going in and out and a little arm for the cable to clip into.
Feb 4, 2014 | 08:11 AM
#3
Registered User
Joined: Jan 2008
Posts: 11,338
Likes: 120
From: Austin, Texas
More then likely the heater control valve, not sure on a taco. On my 96 4runner the cable from the heater control inside the truck runs all the way thru the firewall and to the valve. My valve sits in middle just above the engine mounted to the firewall has some hoses going in and out and a little arm for the cable to clip into.
Thread
Thread Starter
Forum
Replies
Last Post
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 10, 2015 06:21 PM
