Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

barely idles. will not accel, bogs real bad.

Thread Tools
 
Search this Thread
 
Old Apr 12, 2013 | 11:11 AM
  #1  
hotrodford88's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 5
Likes: 0
From: jasper al
barely idles. will not accel, bogs real bad.

hey im pretty new to yotas. only had mine about 2 months. today it started idleing really rough and when you try to give it gas it bogs really bad and sometimes stalls. its so bad its not driveable. started by cleaning throttle body and checking dist cap rotor button and wires. all fine. after some more checking i figured out that it will run right as long as i spray carb cleaner through the MAF sensor. idk what the problem is. the truck is an 88 4x4 with a 22re and a 5speed with 145000 miles it has a cold air intake and an msd coil. its stock other than that. any help will be appreciated.
Reply
Old Apr 12, 2013 | 11:19 AM
  #2  
MATTSRED's Avatar
Registered User
 
Joined: Oct 2008
Posts: 137
Likes: 0
From: OREGON
Check the vacuum lines?
Reply
Old Apr 12, 2013 | 11:56 AM
  #3  
Gizler00's Avatar
Registered User
15 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Aug 2007
Posts: 3,276
Likes: 7
From: Pennsylvania
Fuel pump. It's probably running off of the carb cleaner when you are spraying it in there. Try testing fuel pressure. And do the fuel pump test as stated in the FSM
Reply
Old Apr 12, 2013 | 12:18 PM
  #4  
hotrodford88's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 5
Likes: 0
From: jasper al
ok checked the vacum lines and all look good. replaced the fuel filter. and no change. if you very very slowly rev it it will take it and run up. but if you try to rev up other than really slowly it bogs really bad.
ill check feul pressure next.
Reply
Old Apr 12, 2013 | 12:41 PM
  #5  
hotrodford88's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 5
Likes: 0
From: jasper al
well think i figured it out. after Gizler00 said fuel pump i crossed fp to b+ at the diag connector and got under the truck and listened to the pump and it was rattling and sounded rough. did the car lot trick and slapped the tank with a hammer a few times and now its running right. geuss ill replace the fuel pump this weekend.
Reply
Old Apr 12, 2013 | 06:10 PM
  #6  
VAhunter's Avatar
Registered User
 
Joined: Dec 2012
Posts: 81
Likes: 0
From: New Castle, Va
Mine did the same thing, a new fuel pump helped a little but the thing that got it going was the fuel pressure regulator. Pull the vacuum line on it and if it feels wet or has a strong fuel smell it's probably bad. Check the fuel filter as well

Last edited by VAhunter; Apr 12, 2013 at 06:12 PM.
Reply
Old Apr 12, 2013 | 06:21 PM
  #7  
VAhunter's Avatar
Registered User
 
Joined: Dec 2012
Posts: 81
Likes: 0
From: New Castle, Va
Originally Posted by VAhunter
Mine did the same thing, a new fuel pump helped a little but the thing that got it going was the fuel pressure regulator. Pull the vacuum line on it and if it feels wet or has a strong fuel smell it's probably bad. Check the fuel filter as well
Well, that's what I get for skimming the thread. Go ahead with the fuel pump. If you get the bed bolts off and lift the bed I would definitely go that route as far as getting to the pump
Reply
Old Apr 12, 2013 | 07:28 PM
  #8  
hotrodford88's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 5
Likes: 0
From: jasper al
thats the plan. pull the bed bolts and set the bed up on the tires and back bumper.
Reply
Old Apr 13, 2013 | 03:44 AM
  #9  
Gizler00's Avatar
Registered User
15 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Aug 2007
Posts: 3,276
Likes: 7
From: Pennsylvania
Glad you figured it out. Sometimes these things can be a headache to chase down.

I love the car lot method. Every time I do it it makes me think of the old movie Used Cars with Kurt Russell. Haha
Reply
Old Apr 13, 2013 | 06:59 PM
  #10  
hotrodford88's Avatar
Thread Starter
Registered User
 
Joined: Apr 2013
Posts: 5
Likes: 0
From: jasper al
lol. yep. it only works for a few miles at a time on mine. the fuel pump sounds like pall bearings in a tin can. lol.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
some drunk guy
86-95 Trucks & 4Runners
23
Aug 3, 2021 06:09 PM
Alexdosdall
Tires & Wheels
21
Dec 10, 2017 05:48 PM
bradahman
86-95 Trucks & 4Runners
8
Oct 1, 2015 09:24 AM
JookUpVandetti
86-95 Trucks & 4Runners
10
Sep 30, 2015 08:58 AM
charlie_fong
General Vehicle Related Topics (Non Year Related)
0
Sep 27, 2015 10:06 PM




All times are GMT -8. The time now is 09:19 PM.