Guys I am at a loss. I have a '99 4runner that I recently purchased. I love the vehicle and it runs great. I noticed before I bought it the guy had the short section of intake hose that connects directly to the throttle body taped up. I figured this would be an easy fix as I've taken parts like this off to clean throttle bodies before. However, I flat out cannot find this part. Does anyone know what the part number is or where online I might be able to find one? I beleive it contains the resonator.

Any pointers or direction on this would be great! I would go to a local pay and pull but I am at work before they open and don't get off until way after they close.

 

got a pic i might have something off a 2000 i parted out

 

This help?
http://www.utoyot8.com/Picture.aspx?...ccode=&ppName=

http://www.toyomotorparts.com/Page_P...3553,3554,3560

 

RWOregon- That helps nicely. I believe the part I need is 17881 but I ama little unsure if that is the hose that attaches directly to the intake plenum. If it is that is what I need.

Elton- My camera kicked the bucket but I will try to get a good pic tonight. I am pretty sure it is 17881, do you still have this part? If so I'd like to discuss pricing and shipping to Windsor CO.

Thanks guys!

 

I believe if I am looking at it correctly 17881 attaches to the air filter box. If this is the case then I need 17882.

I will look for a pic of the 3.4L engine so I can highlight the part in the pic.

 

The hose I need is circled in yellow.

 

17882 is what you have circled above.

 

Is it taped up because its split open, or is the tape just blocking an opening?

 

I do not know other that the tape is wrapped all the way around. I have not taken it off because it runs now. Was just told that I should replace the hose sooner than later.

17882 it is. So where might I find this part for a resonable price. Stealership wanted $80!

 

Use the link I posted above. There are online Toyota dealers who sell parts for much less than the local dealer.

 

Thanks I just put one on order. Hopefully it gets here fast!

 

wish i saw this last night. i got one! goodluck

 

hey, you could always just do a homemade cold air intake or replace the whole section with some electrical conduit piping from home depot. I frankensteined my yota's intakes and like 'em better than the stock fitting there.

for $80 you can make one hellufa nice intake. Sucks how much parts are. Went to buy a new doorhandle for my old runner, they want over $100 at the discounted price. robbery...

 

Ended up being $50 shipped from the website linked above. I thought about doing my own kind of deal, but I just don;t know enough about how everything works to deviate too much from the norm.

Always thought it would be cool to have the additional horses from a cold air intake but refuse to pay the couple hundred bucks for a kit.