Wife got a jump start on 96 4 cylinder 4Runner with cables crossed. Got a new battery and installed it. There is no power at all to the vehicle. Dome lights won't even come on. I assume it blew fuse or worse, but don't see anything that looks burned out or funny. Any ideas?

 

If I remember there should be a fusible link for your truck? Google it and you should be good!

 

mayabe checkout you ECU or your powr relay

 

80 amp fuse in engine bay fuse block. need to slide it out unbolt with i believe 8mm or 10mm bolts on either side. i did the same thing.

 

Thanks for the ideas, is there a way to tell if the fusible link is burned out without taking the entire fuse box out? Strange but I don't have an 80 amp fuse, just a 100 amp one that's labled starter.

 

Here's a writeup on how to swap your fusable link:

http://www.toyota-4runner.org/3rd-ge...ks-w-pics.html

Also, make sure your ground wires are all good. This should set you straight, no big deal.