3-link SAS, 1tons, 37s -newb. Advice?
May 16, 2012 | 01:12 AM
#1
Thread Starter
Registered User
Joined: Mar 2007
Posts: 864
Likes: 0
From: Santa Clara California
3-link SAS, 1tons, 37s -newb. Advice?
Ive been looking to SAS my 92 toyota and having recently came up on a set of axles out of a 3/4ton suburban, im going to use them! Along with some 37inch military take off tires.
For the suspension I was going to give the ol 3 link a try with a kit from Barnes
I still need some help figuring out ride height, up travel, and shocks/coils
im going to have $2500/3000 to work with total after tires, and that may include buying a welder for $500.
Now I am a total newb to the SAS, more so to link setups.
ANy suggestions for ANYTHING on this? I would like some help if you can! If not im going in blind!
For the suspension I was going to give the ol 3 link a try with a kit from Barnes
I still need some help figuring out ride height, up travel, and shocks/coils
im going to have $2500/3000 to work with total after tires, and that may include buying a welder for $500.
Now I am a total newb to the SAS, more so to link setups.
ANy suggestions for ANYTHING on this? I would like some help if you can! If not im going in blind!
Nov 26, 2012 | 11:03 AM
#3
Registered User
Joined: Feb 2010
Posts: 97
Likes: 0
From: NC
Being new to automotive mx myself (I'm an acft mechanic) I have been considering an FJ80 suspension for my '85 Runner. If you are unfamiliar, it would be a beefed-up, linked swap that as far as I know has never been done. A VERY experienced 4Runner owner and member advised me that it wouldn't be worth my time. Point is, I am very interested in seeing where this goes...Sorry if I am thread jacking.
Thread
Thread Starter
Forum
Replies
Last Post
Longbed 90
86-95 Trucks & 4Runners
22
Mar 11, 2019 12:38 PM
