Notices
The Classifieds GraveYard Where old classifieds threads go that are too good to let go

PARTING OUT - 1990, 1995, 1997 4RUNNERS and 1988 FJ62

Thread Tools
 
Search this Thread
 
Old Feb 15, 2011 | 07:23 PM
  #1  
yotaman's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
PARTING OUT - 1990, 1995, 1997 4RUNNERS and 1988 FJ62

I need to clean up my back yard.

1990 4Runner (5 speed, 3.0, 4x4) – Brown Interior, Gold Exterior

The following have been sold already. I have everything else. It has the swing-out tire carrier also.
  • Transmission / x-case – SOLD
  • Seats – SOLD
-------------------------------------------------------------------------

1995 4Runner (Auto, 3.0, 4x4) - Brown Interior, Gold Exterior

This was my beater. I still have most of the exterior and interior stuff.
  • Motor – SOLD
  • Transmission / x-case – SOLD
  • Front Suspension – GONE FROM SAS
  • Rear Suspension- GONE FROM SAS
  • Tailgate – SOLD
-----------------------------------------------------------------------

1997 4Runner (Auto, 3.4, 2x4) – Brown Interior, Silver Exterior

I purchased this for the motor. I still have everything but the seats and interior door panels. This truck was in a front impact crash so there is no hood, or fenders. All of the front suspension stuff looks good.
  • Motor – GONE
  • Seats – SOLD
  • Mirrors – SOLD
  • Interior Door Panels – SOLD
  • Center Console - SOLD
-----------------------------------------------------------------

1988 FJ60 Land Cruiser

Got this for the front axle. There's not much left but it does still have a few parts left. The body has a lot of rust.
  • Motor Head – SOLD
  • Front Seats – SOLD
  • Transmission – SOLD
  • Front and Rear Axles – SOLD
--------------------------------------------------------------------

Please post what you are looking for below. I will see if I have it and post a price.

I will try to keep this post updated with what has been sold as it's sold.

Last edited by yotaman; Feb 16, 2011 at 08:40 AM.
Old Feb 15, 2011 | 11:32 PM
  #2  
4RUNNERTMAN's Avatar
Registered User
 
Joined: Feb 2010
Posts: 47
Likes: 0
From: Florida
Is the rear cup holder on 97 still good? How much to 34667
Old Feb 15, 2011 | 11:36 PM
  #3  
yotaman's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by 4RUNNERTMAN
Is the rear cup holder on 97 still good? How much to 34667
Center console is gone.
Old Feb 16, 2011 | 04:55 AM
  #4  
waskillywabbit's Avatar
Banned
iTrader: (-1)
 
Joined: Jul 2003
Posts: 3
Likes: 20
3.4/3.0 radiator and shroud, cruise control box (engine bay)

I'm sure I'll find more soon as mine comes together. If it's enough I'll just make a roadtrip.

:wabbit2:
Old Feb 16, 2011 | 08:39 AM
  #5  
yotaman's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by waskillywabbit
3.4/3.0 radiator and shroud, cruise control box (engine bay)

I'm sure I'll find more soon as mine comes together. If it's enough I'll just make a roadtrip.
I have a radiator and I think I have the shroud out of the 3.0. The 3.4 one got smashed in the wreck.

I have the cruise for both 3.0's. I'd have to check on the 3.4. $20.00 for the cruise sound fair?
Old Feb 16, 2011 | 09:33 AM
  #6  
Nelsonmd's Avatar
Registered User
 
Joined: Aug 2010
Posts: 242
Likes: 0
Here's what I am looking for from the 97:

Spare Tire Winch
Parking Brake hardware - bell cranks, bell crank boots, etc, cable mounts, and associated little parts. Whole cable with bell cranks is ok too.
Rear Hatch Striker assembly - the part on the door, and the mount on the floor panel (mine are super rusty).
Gas tank skid plate - Is there any rust on it? If no, I'd love to see what shipping would run.
Old Feb 16, 2011 | 07:34 PM
  #7  
yotaman's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by Nelsonmd
Here's what I am looking for from the 97:

Spare Tire Winch
Parking Brake hardware - bell cranks, bell crank boots, etc, cable mounts, and associated little parts. Whole cable with bell cranks is ok too.
Rear Hatch Striker assembly - the part on the door, and the mount on the floor panel (mine are super rusty).
Gas tank skid plate - Is there any rust on it? If no, I'd love to see what shipping would run.
I have the spare tire winch. How's $25.00?

I have all the parking brake stuff? I'm not sure what a bell crank is but how's $65.00 for everything from the pull up part all the way out to the axle sound?

The gas skid plate is in good condition. No major rust that I could see. May have a small dent. How's $40.00 sound?

My best guess on shipping would be around $50-$75 for everything listed above.
Old Feb 17, 2011 | 07:42 AM
  #8  
mr3436's Avatar
Registered User
 
Joined: Jan 2004
Posts: 63
Likes: 0
From: Seattle
Did the rear window work from both the switch and the key? If so how much for the relay box. shipped to 98119
Old Feb 17, 2011 | 07:46 AM
  #9  
yotaman's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by mr3436
Did the rear window work from both the switch and the key? If so how much for the relay box. shipped to 98119
It did. Trucks been sitting for a few years. Where's the relay box located?
Old Feb 17, 2011 | 09:22 AM
  #10  
stockwell45's Avatar
Registered User
iTrader: (1)
 
Joined: Dec 2007
Posts: 1,144
Likes: 0
From: Sonora, CA
Passenger corner light shipped to 95372?
Old Feb 17, 2011 | 10:16 AM
  #11  
yotasavg's Avatar
Registered User
 
Joined: Jan 2007
Posts: 1,987
Likes: 0
From: Chico Republic, NOR*CAL
I need an IFS steering box for my '94 4runner.... got one to ship to 95928?
Old Feb 17, 2011 | 10:35 AM
  #12  
yotaman's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by yotasavg
I need an IFS steering box for my '94 4runner.... got one to ship to 95928?
PM sent
Old Feb 19, 2011 | 04:56 AM
  #13  
Slowtech4R's Avatar
Registered User
 
Joined: Feb 2011
Posts: 15
Likes: 0
From: Upstate NY
Need a clean fuel pump bracket unit

Hello, new to the forum, old to everything else. Stranded in the salt belt...lost the return hard line off the top of the fuel pump tank seal cover. How much for a clean 2nd gen. fuel pump bracket unit, don't need the pump, just the bracket out to the soft line. Thanks, Andy 12308
Old Feb 19, 2011 | 07:35 AM
  #14  
yotaman's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by Slowtech4R
Hello, new to the forum, old to everything else. Stranded in the salt belt...lost the return hard line off the top of the fuel pump tank seal cover. How much for a clean 2nd gen. fuel pump bracket unit, don't need the pump, just the bracket out to the soft line. Thanks, Andy 12308
So you need the hard line from the tank up and out to the soft line. Does it go all the way up to the engine compartment.
Old Feb 19, 2011 | 09:40 AM
  #15  
sweet_emo7's Avatar
Registered User
 
Joined: Feb 2011
Posts: 21
Likes: 0
From: Cochrane, Alberta, Canada
do you have the right rear tail light?
Old Feb 19, 2011 | 10:46 AM
  #16  
yotaman's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by sweet_emo7
do you have the right rear tail light?
I have the lights from the 90 and 95.

Last edited by yotaman; Feb 19, 2011 at 10:47 AM.
Old Feb 19, 2011 | 06:07 PM
  #17  
Slowtech4R's Avatar
Registered User
 
Joined: Feb 2011
Posts: 15
Likes: 0
From: Upstate NY
Fuel pump carrier bracket

I see my request was a little vague.....I'm looking for the in-tank bracket that supports the fuel pump. There is a flange on the top of the tank with 7 bolts and this is where the supply line starts. There is another nipple for the return brazed on the top of this flange, where mine is rusted through. I'm in the process of fabbing up a new line, but please give me a price for this part for when the temps are higher than 2o degrees in my garage. Thanks, Andy
Old Feb 20, 2011 | 08:17 AM
  #18  
KryptoKid's Avatar
Registered User
 
Joined: Jan 2007
Posts: 62
Likes: 0
From: Boston, MA
Can you email me a pic of the steering wheel and column? Nottastalker@yahoo.com
Old Feb 20, 2011 | 08:26 AM
  #19  
yotaman's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 1,165
Likes: 6
From: Cumming, GA
Originally Posted by KryptoKid
Can you email me a pic of the steering wheel and column? Nottastalker@yahoo.com
What vehicle?
Old Feb 20, 2011 | 08:55 AM
  #20  
KryptoKid's Avatar
Registered User
 
Joined: Jan 2007
Posts: 62
Likes: 0
From: Boston, MA
The 3rd gen...sorry
Originally Posted by yotaman
What vehicle?



All times are GMT -8. The time now is 07:27 PM.