Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Replaced some parts and still can't get idle right.

Thread Tools
 
Search this Thread
 
Old Oct 20, 2010 | 04:27 PM
  #1  
Charlie9422RE's Avatar
Thread Starter
Registered User
 
Joined: Oct 2010
Posts: 23
Likes: 1
Replaced some parts and still can't get idle right.

I posted a post about this before but since then I've done so many things and nothing has helped.

My problem started out when I would step on the brakes and the engine would surge. Everywhere I looked everyone says to lower your idle (Which I think is kinda crazy that you would have to do that... I wouldn't think you would have to ever lower your idle if everything was working correct) But when I went to lower mine I noticed my screw was already down. My engine now surges all the time; even worse when I step on the brakes.

I checked everywhere for vacuum leaks, set the ignition timing, Cleaned the TB and idle valve, replaced the thermostat and coolant sensor, and just today I replaced the TPS. Nothing has helped it at all. I'm running out of ideas. I feel like maybe there is a vacuum leak somewhere. I just don't know where to look anymore. I have a code (the only code I have) for a TPS but I replaced that today and it didn't help at all.

Note: When I jump the data link it runs a lot smoother and doesn't surge.

If anyone can help it will really help me out a lot. My other car is being painted at the moment and I was counting on my truck for the next couple weeks.

Last edited by Charlie9422RE; Oct 20, 2010 at 04:29 PM.
Reply
Old Oct 20, 2010 | 05:24 PM
  #2  
TNRabbit's Avatar
Contributing Member
 
Joined: Apr 2006
Posts: 4,787
Likes: 36
From: TENN Native Languishing in Virginia
This is a common problem with automatic transmission models. I don't know exactly what the fix is, but it's been covered a dozen or more times in the past. Perhaps someone else will be along shortly & address it more precisely...
Reply
Old Oct 20, 2010 | 05:40 PM
  #3  
iamsuperbleeder's Avatar
Contributing Member
 
Joined: Feb 2008
Posts: 12,248
Likes: 33
From: Lake City, Fl
exactly what parts have you replaced, just the TPS?
Reply
Old Oct 20, 2010 | 05:42 PM
  #4  
Charlie9422RE's Avatar
Thread Starter
Registered User
 
Joined: Oct 2010
Posts: 23
Likes: 1
Thanks for the reply. I actually have a Manual Trans. I know that a lot of people run into these issues and its all been covered so many times. I've spent hours searching , not just this forum but the whole internet. Im thinking about just getting rid of the truck.
Reply
Old Oct 20, 2010 | 05:43 PM
  #5  
Charlie9422RE's Avatar
Thread Starter
Registered User
 
Joined: Oct 2010
Posts: 23
Likes: 1
I replaced the TPS, Thermostat, and Coolant sensor.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Yont283
84-85 Trucks & 4Runners
7
Sep 23, 2022 08:06 PM
subaruwrx88011
Vehicles - Parting Out
4
Oct 9, 2015 12:39 PM
miceal383
86-95 Trucks & 4Runners
1
Jun 29, 2015 12:27 AM
Peteyg39@hotmail.com
Newbie Tech Section
1
Jun 26, 2015 08:15 AM
Mutinebullfrog
86-95 Trucks & 4Runners
1
Jun 18, 2015 01:36 PM




All times are GMT -8. The time now is 06:33 PM.