I'm ready to mount my ARB compressor and am having difficulty finding a bracket to attach it. I moved my cruise control toward the air filter so I have space. I'm considering using L-brackets but not sure that will be sturdy enough. If you could let me know what you used, that'd be great.

Thanks,
Phil

 

tag. I'll watch this one, too. I want to see pics of ppls compressor installs in 3rd gen engine bays.

 

I mounted mine where your abs is, I don't have abs so I had a big ole empty spot

 

I bolted it using the ARB hardware to the inner fender.

 

Thanks for the pix and ideas. Bolting it straight to the fender might work if I can squeeze it in. I'll probably have to shim one side because of the curve of the fender.

 

OK, anybody with a 3rd gen w/ABS?? So far a 3rd gen w/o and a 2nd gen w/ 3.4 swap...

 

Put it in the utility compartment in the very back of the truck (pass side). I've got plans to move mine there soon. I had it installed a while back and they stuck it on the inside of the frame near the front and I don't like it there.

 

Can you enlarge a 96-98 style rear compartment to a 99+ style? I'd like to keep some storage utility in the space, too.

 

Hmmm, maybe.

 

The only place I could squeeze my compressor in was to build a mount.

 

look at this thread:
https://www.yotatech.com/forums/f2/m...runner-180108/