ok so heres the deal took out the 22r and dropped in a 20r but now i need to wire a electric fuel pump was just wondering if anyone has done this and has some tips they would like to share, like what did you hook the pump up to accessory wire or whatever and another thing is it possible to remove the charcoal canister and run just one line from the tank so any tips or tricks will help thanks

 

Whatever electric pump you use you need to know its maximum amps. You need a relay and auto resetting circuit breaker sized larger then the max rating of the electric pump. I run a Mallory Model 110 using a relay and 15amp auto reset circuit breaker. The relay is energized when I turn on my ignition switch and the pump power comes directly from the battery through the circuit breaker. You could use a fuse if you prefer.

I moved the fuel tank canister from the firewall and installed it in the same place as the carb canister on the right fenderwell. I installed one hose with the jet from the canister to my intake manifold.