Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

rinngin rich and pinging

Thread Tools
 
Search this Thread
 
Old Feb 21, 2009 | 10:40 PM
  #1  
94toy4x4fever's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 582
Likes: 0
From: Lewiston, Idaho
rinngin rich and pinging

Ok so some of have read my past post on my 94 toyota pickup (22re) with egr problems egr is fine did all the test, and pinging! i have fixed all issues! All vaccum lines are hooked up right. Im still having pinnging problems. Anyone have a clue what might be going on? injectors havent been touched. Running ngk g power plugs and a 180 degree t stat. I dont know if any of this info would help or what not. thanks guys
Reply
Old Feb 21, 2009 | 11:11 PM
  #2  
toyota4x4907's Avatar
Registered User
 
Joined: Sep 2008
Posts: 4,355
Likes: 2
From: middle of no where Alaska
Your timing is probably too far advanced....what kind of condition is your coil, igniter, wires and everything relating to that in?
Reply
Old Feb 22, 2009 | 12:04 AM
  #3  
mikesnyhere's Avatar
Registered User
 
Joined: Oct 2008
Posts: 73
Likes: 1
From: garden grove ca
my 90 22re was running rich and pinging wouldnt pass smog .the shop diagnosed and fixed it .they replaced the o2 sensor and found 2 vacum lines swithed that went to the egr.are you getting any codes ? that might help diagnose itgood luck with that.
Reply
Old Feb 22, 2009 | 02:23 AM
  #4  
sas'd22re's Avatar
Registered User
 
Joined: Feb 2009
Posts: 212
Likes: 0
From: Vancouver, BC
anyone have the vaccum line diagrams for 22re's? mines an 86 and would just like to check and make sure that their hooked up right
Reply
Old Feb 22, 2009 | 07:10 AM
  #5  
fdeeznutz's Avatar
Registered User
 
Joined: Oct 2008
Posts: 57
Likes: 0
From: Tucson, AZ
It's in the FSM(you can download here) or on the sticker under your hood.

Reply
Old Feb 22, 2009 | 11:33 AM
  #6  
94toy4x4fever's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 582
Likes: 0
From: Lewiston, Idaho
Engine has less than 4,000 miles on it! New plugs,wires. Ignitor isent new and coil is either. Timing is set to 5* tdc with timming jumper installed! Could I try and set the timing to 4* or 3* to see if it will go away? Any long term effects if the timing is not set at stock settings? O2 sensor is also new.
Reply
Old Feb 22, 2009 | 11:33 AM
  #7  
94toy4x4fever's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 582
Likes: 0
From: Lewiston, Idaho
Not getting any codes.
Reply
Old May 15, 2009 | 10:17 AM
  #8  
94toy4x4fever's Avatar
Thread Starter
Registered User
 
Joined: Mar 2008
Posts: 582
Likes: 0
From: Lewiston, Idaho
***Bump***
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Longbed 90
86-95 Trucks & 4Runners
22
Mar 11, 2019 12:38 PM
Longbed 90
86-95 Trucks & 4Runners
27
Oct 19, 2015 11:05 AM
Shaun Crystal Gomban
Pre 84 Trucks
3
Sep 20, 2015 11:16 PM
accuracy
86-95 Trucks & 4Runners
9
Sep 20, 2015 07:44 PM
Boomer8404
86-95 Trucks & 4Runners
3
Sep 10, 2015 09:01 AM




All times are GMT -8. The time now is 06:39 PM.