Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Today was a damn good day!

Thread Tools
 
Search this Thread
 
Old Jun 23, 2008 | 05:19 PM
  #1  
Luvmeye22re's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 720
Likes: 1
From: Ski town Colorado
Today was a damn good day!

Well a couple weeks ago I got all the parts I needed for my 5 speed swap and the engine I bought off TTORA showed up and turned out to be a complete piece of crap. I was pissed because it was a waste of money and didn't fit the description. I'm glad I didn't pay very much money for it. Today I just said screw it and spent every last penny I had on a rebuilt engine so in the next couple weeks or so I will have my rust free 4Runner back with a 5 speed manual and a brand new engine. I had to tell someone because the excitement was killing me
Reply
Old Jun 23, 2008 | 05:26 PM
  #2  
thook's Avatar
Registered User
 
Joined: Sep 2005
Posts: 8,656
Likes: 16
From: NW Ark on wooded ten acres...Ozarks at large!
Any amount of money on a piece of crap is too much money for me! Ugh....hate it for you. But!!! Yay! You gots another motor....that works!! Cool beans, greenjeans!

Good luck with new motor. Take some pics when you finish the project!
Reply
Old Jun 23, 2008 | 05:58 PM
  #3  
drkgypsy's Avatar
Registered User
 
Joined: Aug 2004
Posts: 279
Likes: 0
From: Grew up in Santa Clarita/San Fernando Valley's...now in Washington State
That sucks, man. If it was me, I'd be taken the dude who sold me the engine out to the middle of the desert.....

Good luck with new motor!!!! Sooner or later I'm gonna get a 5sp tranny and dump the auto I've got......
Reply
Old Jun 23, 2008 | 06:05 PM
  #4  
Luvmeye22re's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 720
Likes: 1
From: Ski town Colorado
Yeah the engine sucked and it did set me back about $300 including shipping. The guy said he was pulling it because he was doing an engine swap and that it needed a tchain/cover because it mixed a little oil with water. I wasn't too worried about that until it showed up and I realized that it had been run with an oil/water mixture for some time and on top of that the HG was completely toast. It also had evidence of some pretty bad blow-by and a few other problems, and that was what we could spot by eye. My mechanic is actually doing the work and he said he wouldn't feel comfortable just throwing some crank bearings in and calling it good so I said screw it and got a rebuilt. I've never had a brand new 22re so I'm hoping it will be more powerful than all the 185k+ 4 bangers Ive had in my toyotas but I don't care that much, it's my favorite engine.

Last edited by Luvmeye22re; Jun 23, 2008 at 06:07 PM.
Reply
Old Jun 23, 2008 | 09:11 PM
  #5  
drkgypsy's Avatar
Registered User
 
Joined: Aug 2004
Posts: 279
Likes: 0
From: Grew up in Santa Clarita/San Fernando Valley's...now in Washington State
You'll love and enjoy it. Just follow toyota's break in instruction's to the letter for that engine, and you'll should hit 200k miles no problem, I think.
Reply
Old Jun 24, 2008 | 04:09 PM
  #6  
Luvmeye22re's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 720
Likes: 1
From: Ski town Colorado
I think it should be a good engine. I'm pretty easy on my junk for the most part and the company I bought it from uses all the same parts as Engnbldr so I have confidence in the parts that went into it. I know a few members on a local board that have bought from them and did fine so I'm not worried. Any tips for engine break in from anyone? I've never ever had a new engine.
Reply
Old Jun 24, 2008 | 04:23 PM
  #7  
scuba's Avatar
Registered User
 
Joined: Jan 2008
Posts: 11,338
Likes: 120
From: Austin, Texas
mmm i think there was a good pretty recent thread on the break in.
i know your excited, but search muh boii

ha, id be excited to.
congrats
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bigjstang
86-95 Trucks & 4Runners
21
Jun 2, 2025 03:56 PM
Colington
86-95 Trucks & 4Runners
20
Mar 8, 2020 09:51 AM
Eggslinger
86-95 Trucks & 4Runners
22
Jun 8, 2019 03:32 PM
colinmil
Newbie Tech Section
2
Jul 6, 2015 04:03 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM




All times are GMT -8. The time now is 10:29 PM.