I am removing a 3 inch body lift that the previous owner had installed on my 94 4runner. Does anybody know the length and diameter of the body mount bolts that come from the factory.?

I plan to replace with grade 8 bolts and nyloc nuts.

THANKS

94 4runner 4wd A/T 3.0

 

just go to advance auto or somewhere similar and buy a polyurethane bushing kit for the body and it will come with everything you need including bolts.

 

Thanks, But i think it may be more economical to just get new bolts.

Any body else?

 

where are you going to get new bushings?

 

Body mount bushing kits typically do not come with new hardware, you re-use the existing bolts:
- http://www.4crawler.com/4x4/ForSale/...l#PolyBushings

For new hardware, just get bolts 3" shorter than what is on there now, typically 3/8" dia., stock is 10mm:
- http://www.4crawler.com/4x4/ForSale/...it.shtml#FAQ11

 

my dilemma is that i done want to have to remove all the bolts from before i get the new bolts(dont want my body just hangin out)

I have removed the front left bolt, would all the bolts be the same length as this?


Thanks

 

The factory busing are still there and in good shape, the body lift mearly sat on top of the factory bushings

 

gotcha. k. good luuck

 

am i to beleive that the bolts at all 8 mounts are the same length

 

No.

 

bump
1o char