22re battery intake swap
Apr 23, 2008 | 09:33 PM
#2
Registered User
Joined: Sep 2005
Posts: 8,656
Likes: 16
From: NW Ark on wooded ten acres...Ozarks at large!
Here's a good thread on the subject....
https://www.yotatech.com/forums/f116...y-swap-111508/
https://www.yotatech.com/forums/f116...y-swap-111508/
Apr 24, 2008 | 02:22 PM
#3
I did something similar in my '85:
http://www.4crawler.com/4x4/CheapTri...shtml#Phase-II
AFM wires need to be extended, at least in my case. I used a 9-pin Molex connector (I think 7 wires are used) from radio Shack and cut the wires near the AFM, put in a male and female connector on the ends (plug back in to test). Then make up an extension cable with matching male and female connectors and plug that in and the wiring is extended.
http://www.4crawler.com/4x4/CheapTri...shtml#Phase-II
AFM wires need to be extended, at least in my case. I used a 9-pin Molex connector (I think 7 wires are used) from radio Shack and cut the wires near the AFM, put in a male and female connector on the ends (plug back in to test). Then make up an extension cable with matching male and female connectors and plug that in and the wiring is extended.
Thread
Thread Starter
Forum
Replies
Last Post
steve miller
General Electrical & Lighting Related Topics
2
Oct 10, 2015 01:40 AM
