SA to IFS Brake Conversion
Apr 1, 2008 | 05:19 PM
#2
Nope, you get FJ60 vented front brake rotors, or something like this:
- http://www.marlincrawler.com/htm/brakes/rotors.htm
- http://www.marlincrawler.com/htm/brakes/rotors.htm
Apr 5, 2008 | 04:58 PM
#4
Registered User
Joined: Jun 2007
Posts: 56
Likes: 0
From: Yucca Valley Ca.
Well i actually just did this and it went like this:
82 fj-40 rotors with 90 4x4 v-6 calipers with new pads and new studs and inch and a half spacers from datin fab..... i had to do spacers due to the later model calipers have 4 large pistons instead of 2 big 2 small, so they are bigger and my 15x8 would not fit with 3.75 BS... i also got extended SS braided lines from datin fab.. and i would recommend doin the bearings while you have umm out and maybe the knuckles to since your right there... and thats that..
82 fj-40 rotors with 90 4x4 v-6 calipers with new pads and new studs and inch and a half spacers from datin fab..... i had to do spacers due to the later model calipers have 4 large pistons instead of 2 big 2 small, so they are bigger and my 15x8 would not fit with 3.75 BS... i also got extended SS braided lines from datin fab.. and i would recommend doin the bearings while you have umm out and maybe the knuckles to since your right there... and thats that..
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
Apr 11, 2024 04:39 PM
Jcrawl94
84-85 Trucks & 4Runners (Build-Up Section)
10
Oct 24, 2015 04:34 PM
delmert
84-85 Trucks & 4Runners
11
Sep 30, 2015 04:34 PM
priest16
84-85 Trucks & 4Runners (Build-Up Section)
15
Aug 6, 2015 07:43 AM
harrisdawg
93-98 T100s
1
Jul 26, 2015 09:42 AM
