so truck had a miss so i went to pull the plugs they all came out easy but the 4th seemed funny turns out plug came out with the threads!

so is there any coil kit i should use so i don;t have to pull the head off!
i'm dieing here!

 

If the plug, "...came out with the threads...", it sounds like the previous thread repair has FAILED. I'd try to re-insert the coil with some red threadlocker.

 

I have a kit in handy, PM me if needed. They didn't tap it good or tap it in the wrong way so the insert came out with the spark plug.

 

no there was no coil in it just factory head

i'll pm you later about this kit? or pm me i need this back on the road asap

 

fixxed thanks all!!!

 

Something never mentioned, I read it on the NGK plug site, ALWAYS allow 2 hrs of cool down before removing plugs from an engine with Aluminum heads.

 

damn thats crazy thing was dead cold when i did it as well