I'm looking for a wiring harness for my truck. It's wiring is all cut up and it barely runs. Half the wiring isn't even connected. It was all chopped and they tried to re-do it til it ran. So if anyone has a wiring harness that's compatible with the 1990 22re 4x4 truck, that'd help a lot!! Thanks.

 

I have one for an 85 SR5 with a 22re. Not sure if they are the same though.... Bill

 

Is it a auto or manual? Do you need the engine wiring?

 

It's a 5spd manual. I think it has to be 89-92 to be compatible. Though I could be wrong.

 

Yeah, it's the engine wiring. Got one laying around by chance? ^_^

 

Well I have a 85 22re 5-speed if you find out it will work. Bill

 

85 will require the entire chassis wiring

 

I'm going to look through some boxes tomorrow and I'll let you know.

 

awesome. Keep me posted. ^_^

 

Look at your ECU and tell me how many pins are located on it. It should tell you on top how many it has.

 

I've got 2 one has a 26 and 16 pin connector, and the other has 10,18, and 14 pin connector.

 

Pre 89's are not going to plug into your fuel injectors or TPS for staters.
I think you have to find 89-92. IIRC our Friends at Toyota change the harness again for 92-95 with diffenet igniter and dist connectors as well.

 

it's 10 18 14
hoping to find one that mated to the ecu with part number 89661-35150

Thanks for the info. This will help in my quest greatly so that I don't have to rewire stuff. ^_^

 

Ok, I have one but it's a auto harness which will work, all you will have to do is jump a wire on the harness itself for the starter, which I can do for you.

 

How much do you want for it? Would the reverse lights still work too? I've seen problems with reverse lights when using auto harness on manual vehicles. Let me know.

 

I have a complete one from an 89, 4x4, 5spd. Plus computer



Make me an offer

 

Do you have ECU too? part number 89661-35150
PM'd

 

I dont think the reverse lights would work.