aisin hubs. 2 complete and two in pieces. not sure if i got all the parts.
warn hubs. same situation as above.
3 stock long side inners
3 stock short side inners
2 stock birfs. on already on a long side inner and one on a short
3 spindles
3 knuckles
84 stright housing
84 open third with 4.30's i think
stock steering arms.
2 hub housings still attached to the rotors.
2 calipers. maybe 4 can't remember how many i got.
maybe some more stuff too. can't remember it right now. i'm in class so just going on memory right now.
let me know if interested.
thanks,
alan
soon to have super lift front 4-5 inch sus. lift off my 4runner after i do my swap. 200 obo
looking for sas parts. hanger, shock hoops, shocks, etc.
best way to get a hold of me is email. asumooses@hotmail.com

located in lilburn ga. (near stone mountain) or in carrollton ga. (where i go to school)
thanks,
alan

 

I would take lift if it would fit 1994 pick up and shipped on my dime

 

is the 10 blot a g80 code (factory locking?) do you know what it came out of?

ttyl

 

884runner i emailed you with no response...how much do you want for the lift shipped to 02809 (ifs lift)

 

sorry been busy with trying to sell other stuff and buying sas parts. the lift is still on my truck and someone one else is first in line but i'll keep you in mind if that falls through. the 10 bolt is gone. and i'm gonna part out my other axle so here's what i got.:
aisin hubs. 2 complete and two in pieces. not sure if i got all the parts.
warn hubs. same situation as above.
3 stock long side inners
3 stock short side inners
2 stock birfs. on already on a long side inner and one on a short
3 spindles
3 knuckles
84 stright housing
84 open third with 4.30's i think
stock steering arms.
2 hub housings still attached to the rotors.
2 calipers. maybe 4 can't remember how many i got.
maybe some more stuff too. can't remember it right now. i'm in class so just going on memory right now.
let me know if interested.
thanks,
alan

 

PM sent.

 

Hey - I posed on your other thread, are these different axles, or are both posts about the same axle?

Let me know what you want for a set of Hubs...Calipers... and a Steering Knuckle(s)..... PM me let me know.

 

Are you seeling the manual hubs or not?
If you want to keep the good set I understand but do you want to
sell the pair that is broken down I could use the housing and dial.

 

I'm interested in the calipers let me no shipping to 41731

 

if the aisin hubs are complete with the cone washers, the 54mm locking washers and nut i will take it. do you have a pic?

 

Spindles shipped to 85019?

 

pms sent. hubs are sold. still got other hub parts.
thanks,
alan