chrome univeral 3-section brushgard with light mounts, $75+(1/2 ship)......[pics]
#1
Thread Starter
Registered User
Joined: May 2007
Posts: 636
Likes: 0
From: used to be so. cal. now Indy
chrome univeral 3-section brushgard with light mounts, $75+(1/2 ship)......[pics]


this is the same ones selling $155+30shipping on ebay. i bought for $130 because the mounting hardwares were missing. i've decided to move up to a Bigrock Off-road tube winch bumper.
1 month old on my rig. it needs 4 bolts to mount on the steel bumper, pretty straight up. i had a shop riged some 3/8" thread rods, i will include them in the deal too.
you can mount everything include the middle section and 2 headlight grills, or just the middle section using as a bullbar. you can mount the lights on the top bar or switch to the buttom. reason i had the light mounts on the top because the 6" Hella 500 lights won't fit on the buttom.
$80 for the whole thing and i pay whatever half of the shipping cost is.
contributing members, your word is your money, you send me the check i ship it to you the same time so you dont' have to wait for it.
#2
#3
Thread Starter
Registered User
Joined: May 2007
Posts: 636
Likes: 0
From: used to be so. cal. now Indy
it should but i'm on vacation up in san luis obispo now, will be back late monday. i'll send you some close-up pictures then.
#6
Thread Starter
Registered User
Joined: May 2007
Posts: 636
Likes: 0
From: used to be so. cal. now Indy
ok, guys, here are the close-up pictures:




it's kinda tricky to mount on the bumper, thou. that's why i took it to a shop to have it done.
basically they drilled 2 holes on the veritcal side of the bumper first, then 2 other holes on the top. the 2 tabs on each side are not 90 degrees. it didn't come with the original nuts and bolts when i bought it, that's why the shop made these 3/8" thread rods.
there are few guys emailed and pm'd me, and i have replied. but i was on the road since thursday, so i don't really remember who still wants it or who's first.
so please let me and others know if you don't want it. just trying to be fair.
thanks.
edit: note i don't have my plastic valance under the chrome bumper, if you have it on yours, it may in the way.
there are 2 light mounting tabs on one of the horizontal bars, it can be switched whatever the way you want with an allen wrench.




it's kinda tricky to mount on the bumper, thou. that's why i took it to a shop to have it done.
basically they drilled 2 holes on the veritcal side of the bumper first, then 2 other holes on the top. the 2 tabs on each side are not 90 degrees. it didn't come with the original nuts and bolts when i bought it, that's why the shop made these 3/8" thread rods.
there are few guys emailed and pm'd me, and i have replied. but i was on the road since thursday, so i don't really remember who still wants it or who's first.
so please let me and others know if you don't want it. just trying to be fair.
thanks.
edit: note i don't have my plastic valance under the chrome bumper, if you have it on yours, it may in the way.
there are 2 light mounting tabs on one of the horizontal bars, it can be switched whatever the way you want with an allen wrench.
Last edited by TC4RNR; Sep 4, 2007 at 03:16 PM.
Trending Topics
#8
Thread Starter
Registered User
Joined: May 2007
Posts: 636
Likes: 0
From: used to be so. cal. now Indy
since nobody has comitted, yes, it is available. pm me the address so i can get a shipping quote from UPS.
#9
Thread Starter
Registered User
Joined: May 2007
Posts: 636
Likes: 0
From: used to be so. cal. now Indy
sold! pending fund from "stormin94".
thanks.
thanks.
Thread
Thread Starter
Forum
Replies
Last Post
WTB[WestCanada]: 1989 4runner stock front bumper and other items
lledwod
Items Wanted
1
Aug 30, 2016 01:03 PM
Johntom240
General Electrical & Lighting Related Topics
7
Jul 13, 2015 12:18 AM
jon.r
General Vehicle Related Topics (Non Year Related)
8
Jul 11, 2015 03:34 PM




