i used the zuk spring mod
#1
i used the zuk spring mod
so my truck had really bad springs in the rear . 86 4runner and flat on overloads.
before
http://s88.photobucket.com/albums/k1...icture0061.jpg
after
http://s88.photobucket.com/albums/k1...rent=truck.jpg
i also did rear axle bearings and wheel cylinders last night in the rain . it decided it wanted to spit the axle in my driveway. and i didn't have a 40 ton press. i had to use a 2 pound sledge and a pipe i know tires aren't the same size but new ones coming soon.
before
http://s88.photobucket.com/albums/k1...icture0061.jpg
after
http://s88.photobucket.com/albums/k1...rent=truck.jpg
i also did rear axle bearings and wheel cylinders last night in the rain . it decided it wanted to spit the axle in my driveway. and i didn't have a 40 ton press. i had to use a 2 pound sledge and a pipe i know tires aren't the same size but new ones coming soon.
#6
I was also wondering about the impact on Flex these have. I'd imagine they would prevent the rear from flexing. Emailed Zuk yesterday as I live nearbye, hope to get a set of these for my Saggy rear if there is no bad impact to flexing the rear, will go the new leaf route if that is the case.
Trending Topics
#10
it's white, well off white with some gray, soon to be white camo
here's a pic of it
http://www.leded.com/GutterMaBell_Ap...07/image6.html
only thing now is i got some 33s on it
so do you live in ludlow?

here's a pic of it
http://www.leded.com/GutterMaBell_Ap...07/image6.html
only thing now is i got some 33s on it
so do you live in ludlow?
Last edited by LTrunner; Apr 30, 2007 at 03:19 AM.
#11
ok i see u all the time. i live in the orchard. i used to drive the half red half black convertable s10 blazer on 35's. it had 383 stroker. sas'd with wagoneer d44's. i want to go to 35's on this one too, and maybe a diesel.
Thread
Thread Starter
Forum
Replies
Last Post
sonorn67
84-85 Trucks & 4Runners
3
Sep 19, 2015 05:39 PM
JookUpVandetti
86-95 Trucks & 4Runners
8
Sep 17, 2015 09:25 PM








