Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

squeaky clutch but only when cold

Thread Tools
 
Search this Thread
 
Old Mar 31, 2007 | 11:47 AM
  #1  
ramos's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 5
Likes: 0
From: Downingtown, PA
squeaky clutch but only when cold

i have searched this alittle, all the squeaky clutch is a constant noise. mine only happens when i first start teh frist time of the day or when it sits for a few hours w/o warming it up first. if i just start and go it squeaks. not in gear and going but when changing gears or when i press down on the clutch. it only lasts a short while, but i didnt know if it was something to worry about or if its something a 91 truck does cuz its old and needs warming. it even happened on a day that it was 80 out leaving work and didnt warm it up.

thanks for the help
Reply
Old Mar 31, 2007 | 02:25 PM
  #2  
drew303's Avatar
Registered User
 
Joined: Dec 2006
Posts: 2,880
Likes: 2
From: Olympia, WA
Thats the piston in the master clutch cylinder. Does the pedal feel sticky? As in it doesnt slide in and out smoothly but has some hesitation? Sticky piston.

Get a OEM master (marlincrawler.com has both OEM master and slaves).

WD 40 is a good QUICK fix, spray it on the piston rod it will work for maybe up to a week before the squeak returns but the problem will only get worse.
Reply
Old Apr 1, 2007 | 02:39 AM
  #3  
ramos's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 5
Likes: 0
From: Downingtown, PA
how hard is it to change the master clutch cylinder?
Reply
Old Apr 1, 2007 | 04:18 PM
  #4  
gaboonviper85's Avatar
Registered User
 
Joined: Feb 2007
Posts: 71
Likes: 0
From: philadelphia
not at all!!
Reply
Old Apr 1, 2007 | 05:48 PM
  #5  
drew303's Avatar
Registered User
 
Joined: Dec 2006
Posts: 2,880
Likes: 2
From: Olympia, WA
It's easy. Very easy.
Reply
Old Apr 2, 2007 | 10:25 AM
  #6  
ramos's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 5
Likes: 0
From: Downingtown, PA
now that i have an idea of what it is it has made any noise. its like she knows, lol.
Reply
Old Apr 2, 2007 | 10:28 AM
  #7  
thook's Avatar
Registered User
 
Joined: Sep 2005
Posts: 8,656
Likes: 16
From: NW Ark on wooded ten acres...Ozarks at large!
Girls....they always know.
Reply
Old Jul 27, 2009 | 03:28 PM
  #8  
Vicfire's Avatar
Registered User
 
Joined: Jun 2009
Posts: 21
Likes: 0
From: Victoria
Bump!

I just wanted to bump this thread because I am now having the same problem. I have this squeak that comes from the clutch master cylinder piston when the truck is cold. After driving a few miles is goes away. Can I spray lithium grease inside the piston housing? or do I have to replace my master cylinder? The clutch otherwise works great, no problems, just that squeak.
Reply
Old Dec 8, 2009 | 08:42 AM
  #9  
pburke's Avatar
Registered User
 
Joined: Dec 2006
Posts: 8
Likes: 0
another bump

I may have a similar problem

I get a squeak only when engaging the clutch from a dead stop, getting the vehicle to move. Doing it very slowly seems to not cause the noise at all, but normal driving will cause a squeak.

It seems to go away as things get hot, but I have a hunch it is the clutch disk rather than anything in the hydraulic system. Clutch is now 110k miles old, some slight towing (motorcycle trailer, about 5 times for a few hundred miles), so I guess it may be wearing and only grip better as things expand down there from engine heat.

I don't feel any slip in the clutch, though. So, not knowing if sqeaky sounds are normal signs of clutch disk wear, could it be anything else?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
--Oz--
86-95 Trucks & 4Runners
1
Sep 6, 2015 01:06 AM
Squigglez
86-95 Trucks & 4Runners
9
Sep 4, 2015 07:33 AM
moparbay
86-95 Trucks & 4Runners
1
Sep 3, 2015 12:48 PM
northwalker
03+ 4Runner/GX470, & 05+ Tacomas
0
Sep 3, 2015 12:21 PM
Nick Berg
86-95 Trucks & 4Runners
8
Sep 3, 2015 04:36 AM




All times are GMT -8. The time now is 07:39 PM.