oil cooler part id

Reply Subscribe

Thread Tools

Search this Thread

Mar 27, 2007 | 04:16 PM

justinking060310

Thread Starter

Registered User

Joined: Dec 2006

Posts: 611

Likes: 1

From: Virginina Beach

oil cooler part id

what piece is that? i dont have the cooler to look at right now and I am trying to figure out if i need to replace it.... i have the 2 o-rings and the 2 hoses.....

kat

Mar 27, 2007 | 04:22 PM

Babypig

Registered User

Joined: Oct 2002

Posts: 1,091

Likes: 0

From: Calgary

That would be the oil seal i believe.

Mar 27, 2007 | 04:22 PM

slosurfer

Contributing Member

Joined: Dec 2005

Posts: 2,124

Likes: 0

From: Los Osos, CA (we can't agree on crap!)

It is an o-ring that seals between the cooler and the engine block. I would replace it while you are in there.

Mar 27, 2007 | 04:28 PM

justinking060310

Thread Starter

Registered User

Joined: Dec 2006

Posts: 611

Likes: 1

From: Virginina Beach

ok, that probably clears up the note i made- "o ring to oil cooler bracket - oil cooler and bracket assembly"

So there is a total of 3 o rings - the one big one and the two little ones.

Mar 27, 2007 | 04:52 PM

JEBSR5

Registered User

Joined: Jan 2006

Posts: 256

Likes: 0

From: TN native stuck in AL

Quote:

Originally Posted by justinking060310

ok, that probably clears up the note i made- "o ring to oil cooler bracket - oil cooler and bracket assembly"

So there is a total of 3 o rings - the one big one and the two little ones.

That would be correct.

Mar 27, 2007 | 04:53 PM

justinking060310

Thread Starter

Registered User

Joined: Dec 2006

Posts: 611

Likes: 1

From: Virginina Beach

Thanks a ton!

Mar 27, 2007 | 05:00 PM

AuburnRunner

Registered User

Joined: Jan 2007

Posts: 309

Likes: 0

From: Marietta GA

justin.... could you give an update on how this went once its done? I've been needing to install new oil cooler o rings but it looks super cramped up there, and I've been lazy.

oil cooler part id

oil cooler part id

Trending Topics