As you may know I now have a 1990 2door runner. I was wondering if the doors from the same year pickup (standard cab) would fit it? I only ask this because after I took the door pannel off of the passanger side to fix the handle, I found that there was a poor repair job done on the bottom of the door. (and I know where there is a pair of mint doors, hood, fenders, bumper and valance - not that I need all of these) Any one ever swap the doors from these two trucks? I measured the door in two places...

1. Top of body line above the door handle 44 1/8"
2. Top of lower body line middle of door 44 9/16"

Thanks for any help...

 

should be the same, but i would be worrying more about those quarters...

 

I know the 4 door ones wont fit because they are shorter and by the top back of the door is square on the runner, and rounded on the truck. Check that part of the door and that will be a first step. According to the interchange at the wrecking yard, yes the truck door fits the 2 door runner.

 

Quarters will come in the spring, same as rockers. But I can get the doors for $15 complete, that's why I asked (before they crush) Thanks for the response

 

Why dont you call your Toyota dealer and ask if they are the same, or a junk yard those people ought to know

 

Becaues it's
after hours, I work the next four nights and I thought someone here would know.... Not trying to be a d..k just asking.... It helps to know before I go. And as it stands I'll be going as soon as I get home from work Monday morining...

 

Sorry to butt in on someone elses door thread, but does anyone know if a door from a '92 4x4 extended cab pickup will fit on a '91 4X4 4 door 4 runner? Lotta 4's in that sentence.

 

i don't believe so. truck doors are the same whether it be xtra cab or standard

 

I just went outside and measured for you, I have a 89 reg cab pickup, and those measurements are accurate!